Zircon E50 63813 Edge Finding Stud Sensor, 3/4″ (19 mm) Depth

• Locates the edges of wood or metal studs up to 3/4 in. (19 mm) deep
• DeepScan^® mode doubles the scanning depth to 1 1/2 in. (38 mm)
• Easy-to-read LCD display indicates when a stud edge is approached
• Patented SpotLite^® Pointer shines an arrow-shaped light on the wall to mark the target
• WireWarning^® detection indicates the presence of live, unshielded electrical wiring up to 2 in. (51 mm) deep
• Zircon’s patented “over-the-stud” indication alerts user to start the scan in a new location if scanning begins over a stud
• Patented TruCal^® technology indicates when the tool is calibrated and ready for use

Zircon E50 63813 Edge Finding Stud Sensor, 3/4″ (19 mm) Depth Locates

• Wood Studs
• Metal Studs
• Joists
• Wiring Detection

Zircon E50 63813 Edge Finding Stud Sensor, 3/4″ (19 mm) Depth Specifications

• Dimensions: 6.66 in. H x 2.80 in. W x 1.69 in. D (169 mm x 71 mm x 43 mm)
• Weight: 4.3 oz. (122.6 g) without battery
• Battery Type: 9V alkaline (not included)
• Position Accuracy* Up to a depth of ¾ in. (19 mm):  Typically within ¹⁄₈ in. (3 mm) using the dual scan and mark procedure
• Position Accuracy* Up to a depth of 1½ in. (38 mm): Typically within ³⁄₁₆ in. (5 mm) using the dual scan and mark procedure
• Depth* StudScan mode: Up to ¾ in. (19 mm)
• Depth* DeepScan mode: Up to 1½ in. (38 mm)
• WireWarning PositionAccuracy*: Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall
• WireWarning Depth*:  In typical wall with Romex™ wiring, wire can be detected up to 2 in. (51 mm) deep
• Operating Temperature: 20° to 105°F (-7° to 41°C)
• Storage Temperature: -20° to 150°F (-29° to 66°C)
• Humidity: 5-90% RH (non-condensing)
• Water Resistance: Splash and water resistant, not waterproof