Milwaukee 49-16-0001 1” EMT / 3/4” RMC Conduit Bending Shoe for M18 Branch Conduit Bender

Built for branch conduit installations, the Milwaukee 49-16-0001 is a dedicated 1″ EMT / 3/4″ RMC bending shoe designed exclusively for the M18 FUEL™ Branch Conduit Bender w/ AUTO-ZERO™ (5150-20). The lightweight aluminum shoe installs tool-free, so crews can swap sizes quickly at the point of work. High-contrast alignment marks and clearly molded center-of-saddle notches at 30°, 45°, and 60° help electricians hit common angles with consistency, while the durable construction stands up to daily jobsite use. Whether you’re laying out multi-raceway runs or fine-tuning offsets, this shoe supports fast setup and accurate bends without repeated trial and error.

Purpose-built for commercial and industrial environments, the 49-16-0001 pairs with Milwaukee’s cordless bender platform to streamline on-site bending of 1″ EMT and 3/4″ RMC. Its compact dimensions and 3.88 lb weight make handling and transport straightforward, and the bright reference cues keep layout points in view. For teams standardizing on the M18™ system, this dedicated shoe provides repeatable results and efficient changeovers on busy installs.

Milwaukee 1” EMT / 3/4” RMC Conduit Bending Shoe At a Glance

• Exclusive Compatibility: Fits the M18 FUEL™ Branch Conduit Bender (5150-20) for seamless use.
• Tool-Free Installation: Swap shoes in seconds to keep crews moving.
• 1″ EMT / 3/4″ RMC Capacity: Covers common branch conduit sizes on commercial jobs.
• High-Contrast Alignment Marks: Improve visibility for accurate bends in varied lighting.
• Saddle Bend Notches (30°/45°/60°): Quick references for common center-of-saddle bends.
• Lightweight Aluminum Shoe: Easy handling at just 3.88 lb without sacrificing durability.
• Compact Profile: 12.32″ W × 8.09″ H × 2.18″ L for simple storage and transport.
• Jobsite-Ready Design: Made to resist wear in daily electrical work.

Markets

• Commercial Electrical Contracting: Fast shoe changes for multi-raceway layouts and tight timelines.
• Industrial Maintenance & MRO: Reliable bends during line changes and equipment moves.
• Institutional Facilities: On-site adjustments with clear, repeatable angle references.
• Data Centers & Technology Builds: Consistent bends for dense conduit racks.
• Municipal & Utility Services: Field-ready accessory for service upgrades and repairs.
• Trade Education & Apprenticeships: Visible markings support hands-on learning and testing.

Contractors value accessories that reduce setup time and cut down rework. The Milwaukee 49-16-0001 does both: it mounts to the M18 FUEL™ Branch Conduit Bender without tools, then guides accurate bends with high-contrast marks and molded saddle notches. Crews can move from 1″ EMT to 3/4″ RMC work with minimal interruption, using the same cordless platform already staged at the point of install. The aluminum build keeps weight low for transport between rooms, ladders, and floors, yet it’s designed for the daily wear of commercial jobsites. For teams focused on predictable results and efficient changeovers, this bending shoe helps maintain pace and consistency across the entire branch installation.

Milwaukee 49-16-0001 1” EMT / 3/4” RMC Conduit Bending Shoe for M18 Branch Conduit Bender Features

• Conduit Bending Shoe is exclusively compatible with the M18 FUEL Branch Conduit Bender w/ AUTO-ZERO™
• For 1” EMT and 3/4” RMC Conduit
• Tool-Free Installation on to the M18 FUEL Branch Conduit Bender w/ AUTO-ZERO™
• Lightweight Aluminum Shoe
• 30, 45, and 60 Degree Center of Saddle Bend Notches
• Available in a variety of sizes ranging from 3/4” EMT – 1” EMT and 1/2” RMC & 3/4” RMC

Milwaukee 49-16-0001 1” EMT / 3/4” RMC Conduit Bending Shoe for M18 Branch Conduit Bender Includes

• (1) 1″ EMT / 3/4″ RMC Conduit Bending Shoe (49-16-0001)

Milwaukee 49-16-0001 1” EMT / 3/4” RMC Conduit Bending Shoe for M18 Branch Conduit Bender Specifications

• Manufacturer’s Part #: 49-16-0001
• UPC: 0045242846573
• Compatibility: M18 FUEL™ Branch Conduit Bender w/ AUTO-ZERO™ (5150-20)
• EMT Size: 1 in
• Rigid/IMC Size: 3/4 in
• Material: Aluminum
• Product Length: 2.18 in
• Product Width: 12.32 in
• Product Height: 8.09 in
• Product Weight: 3.88 lb
• Installation: Tool-free
• Reference Marks: High-contrast; 30°/45°/60° center-of-saddle notches
• Available Shoe Range: 3/4″–1″ EMT and 1/2″–3/4″ RMC (other sizes sold separately)

Why Customers Prefer the Milwaukee 1” EMT / 3/4” RMC Conduit Bending Shoe for M18 Branch Conduit Bender

Electricians choose this conduit bending shoe because it connects quickly, reads easily, and holds up to daily branch work. The 1 inch EMT and 3/4 inch RMC capacities cover common runs, while the clear alignment marks and saddle notches help deliver accurate offsets and saddles with fewer corrections.

For crews standardized on Milwaukee’s cordless conduit bender, this shoe keeps the workflow moving—swap it on tool-free, line up the marks, and get consistent bends on commercial and industrial projects. Customers looking for the Milwaukee 1” EMT / 3/4” RMC Conduit Bending Shoe often search for: conduit bending shoe, 1″ EMT, 3/4″ RMC, Milwaukee M18 bender, cordless conduit bender accessory.