The Milwaukee 2473-22 M12™ FORCE LOGIC™ Press Tool kit is a compact, 3.8 lb cordless press solution designed for one-handed use in tight mechanical spaces. Its in-line body and forward grip help you navigate around installed piping, while the tool applies 5,400 lb of force for consistent copper CTS-V connections. Auto-Cycle completes a full press and resets automatically, and a status LED confirms a finished press and indicates when calibration is due. With REDLINK™ electronics, the tool monitors output to maintain press accuracy and reduce rework. Paired with the M12™ battery system and a ~30-minute charge time for CP1.5 packs, crews can cut setup time and keep moving on service calls and change-outs—without open flame.
Out of the box, this kit covers 1/2″–1″ CTS-V with included jaws; the tool supports up to 1-1/4″ copper with additional jaws (sold separately). It’s a practical way to standardize cordless press tool work across apartments, schools, and commercial sites where hot-work permits slow the schedule.
Milwaukee M12 12 V Lithium-Ion Cordless Press Tool Kit with Jaws At a Glance
- Lightweight, in-line design: One-handed pressing and better reach in cabinets and overhead.
- 5,400 lb press force: Reliable copper CTS-V connections on common sizes.
- Auto-Cycle + LED status: Confirms complete presses and cues calibration.
- REDLINK™ electronics: Monitors output for consistent, accurate results.
- M12™ system power: Fast CP1.5 recharge (~30 min) keeps service work moving.
- Calibration interval: Up to 32,000 presses between service inspections.
- Material coverage: Copper CTS-V included; additional jaws available for other systems.
Markets
- Residential & Multi-Family: Fast copper tie-ins and repairs in finished spaces.
- Commercial Plumbing: Repeatable joints without torches or purge gas.
- Facility Maintenance: Quick shutdown fixes with visual press confirmation.
- Education & Healthcare: Flame-free connections where hot-work is restricted.
- Light Industrial/MRO: Consistent results during scheduled maintenance windows.
Service techs and installers need a compact M12 press tool that verifies every joint and fits where larger tools don’t. The 2473-22 delivers with a balanced, in-line body for one-hand control, Auto-Cycle to remove guesswork, and a status LED that signals completed presses and upcoming calibration. REDLINK oversight maintains output under load, while CP1.5 batteries recharge in about 30 minutes so you can finish more work in a single visit. With 1/2″, 3/4″, and 1″ CTS-V jaws included—and support up to 1-1/4″ copper with optional jaws—the kit covers everyday copper press connections across apartments, campuses, and small commercial sites.
Key Features of the Milwaukee 2473-22 M12 12 Volt Lithium-Ion Cordless Press Tool Kit with Jaws:
- Smallest and lightest at 3.8 lbs. with up to 5,400 lbs. of force
- Balanced, in-line design suitable for one-handed use
- Enables Connections on Copper, PEX, Black Iron, Stainless Steel, & more
- Features the best calibration standard in the industry
- Batteries recharge in 30 minutes
- Cut, fasten and connect all on one system
- Performs 32,000 crimps between service inspections
- 5-year tool, 2-year battery warranty
- Compatible with all M12™ batteries & chargers
Milwaukee 2473-22 M12 12 Volt Lithium-Ion Cordless Press Tool Kit with Jaws Includes
- (1) M12™ FORCE LOGIC™ Press Tool (2473-20)
- (1) 3/4″ CTS-V Press Jaw for M12™ FORCELOGIC™ Press Tool (49-16-2451)
- (1) 1/2″ CTS-V Press Jaw for M12™ FORCELOGIC™ Press Tool (49-16-2450)
- (1) 1″ CTS-V Press Jaw for M12™ FORCELOGIC™ Press Tool (49-16-2452)
- (1) M12™ Lithium-ion Battery Charger (48-59-2401)
- (2) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401)
- (1) Hard Carrying Case
Milwaukee 2473-22 M12 12 Volt Lithium-Ion Cordless Press Tool Kit with Jaws Specifications
- Model: 2473-22
- Battery System / Voltage: M12™ / 12V
- Press Force: 5,400 lb
- Approx. Cycle Time: ~5 s
- Jaw Capacity (Copper): 1/2″–1-1/4″ (kit includes 1/2″, 3/4″, 1″)
- Tool Length × Width × Height: 12.6″ × 2.75″ × 3.75″
- Net Tool Weight: 3.8 lb
- Calibration Interval: Up to 32,000 presses
- Package Dimensions (H × W × D): 6.0″ × 14.75″ × 21.0″
- Package Weight: 20.4 lb
- Kit Assembled Weight: 11.1 lb
Milwaukee 2473-22 M12 12 Volt Lithium-Ion Cordless Press Tool Kit with Jaws Warranty
- Milwaukee’s 5 Year Limited Tool, 2 Year Limited Battery, 2 Year Limited Jaw Warranty
Why Professionals Choose the Milwaukee M12 12V Lithium-Ion Cordless Press Tool Kit with Jaws
Installers pick this cordless press tool because it delivers copper press connections quickly and safely in places where torches are impractical. The in-line design supports one-hand control overhead and in cabinets, and the Auto-Cycle with LED confirmation helps prevent incomplete joints. With REDLINK monitoring and a service interval of up to 32,000 presses, the tool stays reliable between inspections. For common copper sizes, the included 1/2″, 3/4″, and 1″ CTS-V jaws keep day-to-day work efficient, while optional jaws extend coverage to 1-1/4″ when needed—all on the M12 platform techs already carry.
Reviews
There are no reviews yet.