Crescent DKB446X 44″ Indexing Deck Removal Bull Bar

The Crescent DKB446X is a purpose-built deck removal tool designed to pull planks faster and with less strain. A 180° indexing head lets users set the working angle for leverage and access, whether they’re prying on a landing, over joists, or at ground level. The double-fork end with gripping teeth straddles the fastener line and lifts evenly on both sides of the nail, reducing slippage and minimizing damage when reclaiming boards. Closed head positions speed short pulls, while open positions generate strong downward force for long, stubborn planks.

Manufactured from alloy steel with a powder-coated body and manganese-phosphate tip finish, the Bull Bar is built for daily jobsite abuse. Precision tips slip quickly between tight board gaps, and a centered nail puller targets ring-shank and long nails with balanced leverage. At 44 inches overall, the bar provides reach and leverage without being unwieldy. For deck tear-outs, dock repairs, and general demolition, it’s a durable, high-leverage pry & wrecking tool that helps crews remove more boards in less time.

Crescent 44″ Indexing Deck Removal Bull Bar At a Glance

• 180° Indexing Head: Set the best angle for leverage and access in any work position.
• Double-Fork Design: Balanced lift on both sides of the nail for cleaner, faster board removal.
• Gripping Teeth: Reduce board slippage and keep the tool planted during tough pulls.
• Precision Tips: Slide between tight boards to limit surface damage and aid material reuse.
• Center Nail Puller: Adds balanced leverage for ring-shank and long nails.
• 44″ Overall Length: Delivers high leverage while remaining manageable on site.
• Alloy Steel Construction: Durable build with jobsite-ready finishes.
• Powder-Coated Body & Phosphate Tips: Corrosion resistance for longer service life.

Markets

• Decking & Exterior Renovation: Rapid removal of planks, fascia, and dock decking.
• General Construction & Demolition: High-leverage prying for subfloor and sheathing tear-outs.
• Municipal & Facility Maintenance: Efficient board and platform repair in parks and public spaces.
• Property Management: Turnover and repair work where speed and material salvage matter.
• Marinas & Waterfront Services: Removes weathered boards on piers and ramps with fewer slips.
• Trade Schools & Training: Demonstrates safe prying technique and fast deck removal methods.

Deck tear-outs demand leverage, control, and repeatable results. The DKB446X helps crews work faster by combining a 180° indexing head with a double-fork, tooth-equipped design that grips the board edge and lifts evenly. In closed positions, installers can snap through short pulls quickly. Open positions push down with authority on long planks—ideal when working at grade or across wide joist bays. The center nail puller targets ring-shank nails that resist prying, keeping removal moving without switching tools.

Durable alloy steel, a powder-coated body, and phosphate-treated tips hold up to daily use around dirt, grit, and moisture. Precision tips slip between boards to help preserve salvageable material, while the 44″ length hits the leverage sweet spot for most decks and docks. For contractors and maintenance teams that measure productivity board-by-board, this Bull Bar delivers practical features that translate into fewer stalls and cleaner removals.

Crescent DKB446X 44″ Indexing Deck Removal Bull Bar Features

• Double fork design provides balanced lift on both sides of the nail for faster, cleaner, lower-effort board removal
• Rugged indexing joint allows for maximum flexibility and increased leverage
• Precision tips designed for fast access between boards and reduced damage for reclaiming materials
• Gripping teeth on forks assist in preventing board slippage
• Patent-pending center nail puller allows better balance and more leverage

Crescent DKB446X 44″ Indexing Deck Removal Bull Bar Includes

• (1) 44″ Indexing Deck Removal Bull Bar

Crescent DKB446X 44″ Indexing Deck Removal Bull Bar Specifications

• Weight (Catalog): 7.650 lb
• Overall Length: 44.0 in
• Handle Length: 38.5 in
• Overall Width: 5.118 in
• Overall Height: 2.362 in
• Material: Alloy Steel
• Type: Pry & Wrecking
• End: Double Fork
• Indexing: Yes (180° head)
• Extendable Length: No
• Finish: Powder Coating
• Tip Finish: Manganese Phosphate
• Handle Material: Textured Steel
• Handle Color: Rawhide
• Stock Size: 2 in
• ASME Specification: B107.52
• Handled: Yes
• Packaging: Hang Tab
• UPC: 037103336484

Crescent DKB446X 44″ Indexing Deck Removal Bull Bar Warranty

• Crescent’s No B.S. lifetime warranty

Why Customers Prefer the Crescent 44″ Indexing Deck Removal Bull Bar

Crews choose the DKB446X because its indexing head sets the working angle for real-world deck removal—on stairs, near rail posts, or at ground level. The double fork with teeth grips boards securely and applies a balanced lift that helps prevent slips and torn edges. With a center nail puller built in, users can deal with ring-shank nails without swapping to a separate tool, keeping the workflow continuous.

For everyday searches like “deck removal tool,” “bull bar,” or “indexing pry bar,” this model checks the boxes: high leverage from a 44″ length, durable alloy-steel construction, and finishes that stand up outdoors. The precision tips help preserve boards for reuse, and the textured steel handle maintains control during long pulls. From full tear-outs to targeted repairs, it’s a practical, job-ready choice that turns stubborn planks into clean removals with fewer resets.