RIKON 80-820 8″ x 1-1/2″ Wide Stone Low Speed Bench Grinder with Flexible LED Light

The Rikon 80-820 8-inch low speed bench grinder is built for controlled grinding, sharpening, and edge maintenance in woodworking, metalworking, and maintenance shops. It features a 1 HP motor, 1,750 RPM no-load speed, extra-wide 8″ x 1-1/2″ aluminum oxide wheels, 60 and 120 grit stones, cast metal wheel flanges, adjustable tool rests, LED work light, and rear dust ports.

The Rikon 80-820 is designed for users who want the control of a low speed grinder with more wheel width and more motor than a light-duty bench grinder. RIKON’s current product page describes it as a 1 HP low speed bench grinder with a 1,750 RPM no-load speed, wide 1-1/2-inch stones, and a larger motor suited to both production grinding and sharpening hand tools. That slower wheel speed helps reduce heat build-up at the edge while giving better control during sharpening and shaping work.

This grinder also includes several current features that matter in daily shop use. The wheels are 8 inches in diameter by 1-1/2 inches wide with 60 grit and 120 grit stones for coarse grinding and finer sharpening. RIKON also lists extra-large flat tool rests, cast metal wheel flanges, adjustable eye shields and spark guards, magnifying eye shields, a flexible LED light, rubber feet on a cast iron base, and rear 1-1/4-inch dust ports for cleanup support. It is a practical fit for sharpening chisels, turning tools, plane irons, and other shop tools where slower grinding and steadier support are important.

RIKON 8″ x 1-1/2″ Wide Stone Low Speed Bench Grinder At a Glance

• 1 HP Motor: Provides the power needed for steady grinding and sharpening work.
• Low Speed 1,750 RPM: Helps reduce heat build-up and gives better control at the wheel.
• 8″ x 1-1/2″ Grinding Wheels: Extra-wide stones provide more contact area during sharpening and shaping.
• 60 and 120 Grit Wheels: Covers both rough grinding and finer sharpening in one machine.
• Extra-Large Flat Tool Rests: Provide stable support without a drill-bit sharpening groove.
• Cast Metal Wheel Flanges: Support wheel stability better than lighter stamped flanges.
• Flexible LED Work Light: Improves visibility at the grinding area.
• Magnifying Eye Shields: Help with closer viewing during detail sharpening.
• Rear Dust Ports: 1-1/4-inch ports help with debris control and cleanup.
• Cast Iron Base with Rubber Feet: Adds weight and helps reduce vibration.

Quick Specs

• Brand: RIKON
• Manufacturer Part Number: 80-820
• UPC: 814463017440
• Power Source: Corded electric
• Voltage: 120V, 60 Hz
• Amperage: 7A
• Motor: 1 HP
• Wheel Size: 8″ x 1-1/2″
• Arbor Size: 5/8″
• Speed: 1,750 RPM no load
• Weight: 60 lbs net

Markets

• Woodworking Shops: Good fit for sharpening chisels, plane irons, and turning tools.
• Metalworking Shops: Useful for shaping metal parts, edge cleanup, and general grinding work.
• Maintenance Departments: Practical for keeping utility tools and shop edges in working condition. This is a reasonable use inference based on the machine’s wheel sizes, grits, and motor.
• Trade Schools: Low speed operation and safety features make it suitable for training environments. This is a reasonable use inference based on the grinder’s feature set.
• Serious Home Workshops: A strong option for users who want more grinder stability and wider wheels than a basic bench grinder.

The Rikon 80-820 is a practical grinder for buyers who want a sharpening bench grinder with more surface area, more motor, and better control than typical high-speed units. Its 1,750 RPM speed is better suited to sharpening and tool edge work than faster general-purpose grinders, especially when working with woodworking tools that can overheat at the edge. The 1 HP motor and 1-1/2-inch-wide stones also give it the capacity to handle heavier grinding when needed.

It also includes shop-friendly features that improve day-to-day use. The extra-large flat tool rests, cast metal wheel flanges, adjustable guards, LED light, and rear dust ports make it easier to set up accurately and keep the work area cleaner. For buyers searching for a slow speed grinder, sharpening grinder, or 8-inch bench grinder for woodworking and maintenance use, the 80-820 is built around the features that usually matter most.

RIKON 80-820 8″ x 1-1/2″ Wide Stone Low Speed Bench Grinder with Flexible LED Light Features

• Powerful 1 HP Motor: Built for both sharpening and heavier grinding tasks.
• Low Speed Operation: 1,750 RPM helps control metal removal and reduce heat build-up.
• 8″ x 1-1/2″ Vitrified Aluminum Oxide Wheels: Wide grinding stones provide greater surface area.
• 60 Grit and 120 Grit Wheels: Supports both rough grinding and final sharpening.
• Extra-Large Flat Tool Rests: Provide solid support for sharpening and shaping.
• Cast Metal Wheel Flanges: Support smoother wheel operation and more solid construction.
• Flexible LED Light: Adds direct lighting at the grinding zone.
• Adjustable Eye Shields and Spark Guards: Help improve safety and visibility while grinding.
• 2.5X Magnifying Eye Shields: Allow closer inspection of edges during setup and sharpening.
• Rear Dust Ports: Includes dual 1-1/4-inch ports for dust and debris collection.
• Cast Iron Base with Rubber Feet: Helps reduce vibration and stabilize the grinder.
• Bench or Stand Mounting Holes: Base includes holes for secure mounting.
• Safety Key Lockout Switch: Helps prevent unauthorized or accidental startup.

Compatible Accessories / Works Well With

• RIKON 12-202 LED Work Light: RIKON lists this magnetic-base work light as a grinder accessory and it fits the general sharpening workflow well.
• RIKON 80-903 Spherical Washer Set of 3 for Grinders: Listed by RIKON in its grinder accessories catalog.
• Bench or Grinder Stand Mounting Hardware: The base includes mounting holes for bench or stand installation.
• Dust Collection Hose for 1-1/4″ Ports: Works with the rear dust ports for cleanup support.

RIKON 80-820 8″ x 1-1/2″ Wide Stone Low Speed Bench Grinder with Flexible LED Light Includes

• (1) 8″ x 1-1/2″ 60 Grit Grinding Wheel
• (1) 8″ x 1-1/2″ 120 Grit Grinding Wheel
• (2) Adjustable Cast Metal Tool Rests
• (2) Adjustable Eye Shields
• (2) Adjustable Spark Guards
• (1) Flexible LED Work Light
• (1) Owner’s manual

RIKON 80-820 8″ x 1-1/2″ Wide Stone Low Speed Bench Grinder with Flexible LED Light Specifications

• Brand: RIKON
• Manufacturer Part Number: 80-820
• UPC: 814463017440
• Product Type: Low speed bench grinder
• Motor Horsepower: 1 HP
• Motor Amps: 7A
• Motor Voltage: 120V, 60 Hz
• Speed: 1,750 RPM no load
• Wheel Diameter: 8″
• Wheel Width: 1-1/2″
• Wheel Material: Vitrified aluminum oxide
• Wheel Grits: 60 grit and 120 grit
• Arbor Size: 5/8″
• Dust Port Size: 1-1/4″ O.D.
• Cord Length: 6 ft
• Base Size: 9-1/2″ x 6-1/2″
• Overall Dimensions: 20″ L x 10-5/8″ W x 15-1/2″ H
• Net Weight: 60 lbs

RIKON 80-820 8″ x 1-1/2″ Wide Stone Low Speed Bench Grinder with Flexible LED Light Warranty

• Rikon’s 5-Year Limited Warranty or 2-Year Limited Warranty for commercial, industrial, or educational use.

Why Customers Choose the Rikon 8″ x 1-1/2″ Wide Stone Low Speed Bench Grinder with Flexible LED Light

Customers choose the Rikon 80-820 because it is built around controlled sharpening rather than just fast stock removal. The 1,750 RPM speed, wide stones, and 1 HP motor make it a practical slow speed grinder for users who want to sharpen turning tools, chisels, and plane irons with less risk of overheating the edge. That is why it also fits common search intent around sharpening bench grinder and slow speed bench grinder.

It also stands out for its wider 1-1/2-inch wheels, cast metal flanges, extra-large flat rests, and built-in lighting. Those details matter in regular shop use because they improve support, visibility, and stability. For buyers comparing 8-inch low speed grinders for woodworking, maintenance, or general shop sharpening, the 80-820 has the heavier-duty build and current feature set that make it easy to justify.