PowerWeld CCMIG-B Black 3 Tray Welding Cart with Gas Cylinder Storage

The PowerWeld CCMIG-B Industrial MIG Cart is a three-tray welding cart designed to carry a small MIG welder, gas cylinder, and the basic tools you need for daily welding work. Built from heavy-duty steel with a black finish, it gives you a compact rolling workstation that keeps your machine, leads, and accessories organized instead of scattered across the shop. The cart’s layout puts your welder on the top shelf, consumables and tools on the middle and bottom shelves, and the gas cylinder on a dedicated rear platform secured by chains.

Sized for typical shop and garage welders, the CCMIG-B uses large rear wheels and front swivel casters so it rolls easily over concrete floors and around vehicles, benches, and fabrication tables. A front handle makes the cart simple to steer and reposition, even when loaded with a welder and a full gas cylinder. With dedicated holders for the MIG gun and ground lead on each side, plus room for tools and accessories, this welding cart helps keep cords untangled and gear within reach so you can focus on the weld, not the setup.

PowerWeld Black 3 Tray Welding Cart with Gas Cylinder Storage At a Glance

• Heavy-Duty Steel Construction: Steel frame supports a small MIG welder, gas cylinder, and tools for regular shop use.
• Three Shelf Design: Top, middle, and bottom shelves sized to hold welders, consumables, and accessories in one organized station.
• Dedicated Cylinder Shelf: Rear cylinder platform and chains secure small to larger industrial gas cylinders.
• Easy-Roll Wheel Setup: Large rear wheels and front swivel casters move smoothly on concrete floors and around tight shop spaces.
• Front Push/Pull Handle: Gives solid control when steering or repositioning a loaded welding cart.
• MIG Gun and Ground Cable Holders: Side brackets keep the gun and ground lead stored neatly when not in use.
• Compact Overall Height: Approximately 24 3/4″ high, low enough for easy machine access and stable handling.
• Simple Assembly: Straightforward bolt-together design; ships in a manageable box for quick setup.

Markets

• Welding and Fabrication Shops: Ideal as a primary cart for compact MIG welders with shielding gas.
• Automotive Repair and Body Shops: Keeps welders, gas cylinders, and welding tools mobile around vehicles and bays.
• Construction and Renovation Crews: Useful for portable welding setups on job sites where short moves between work areas are common.
• Manufacturing and Plant Maintenance: Supports maintenance welders who need a mobile station for repairs across the facility.
• Farm, Ranch, and Equipment Repair: Helps move welding gear to tractors, trailers, and machinery in sheds or yards.
• Municipal and Facility Maintenance: Good fit for public works, utility, and building maintenance shops that weld on site.
• Trade Schools and Welding Programs: Provides students with a clear, organized example of a proper MIG welding cart setup.

For these users, the PowerWeld CCMIG-B welding cart offers an efficient way to bring a MIG welder, gas cylinder, and basic tools right to the work area. Fabrication and automotive shops gain a compact cart that rolls easily between bays, cutting down on the time spent carrying machines or dragging cables. Maintenance crews in plants, schools, and municipalities can push a single cart to wherever repairs are needed, rather than hunting down separate bottles and tools. On farms and construction sites, the large rear wheels track well on rough concrete and shop floors, making it practical to reposition the cart with a full gas cylinder on board. In training environments, the three-shelf layout, cylinder storage, and lead holders give students a clear picture of how a safe, organized MIG welding station should look.

PowerWeld CCMIG-B Black 3 Tray Welding Cart with Gas Cylinder Storage Features

• Heavy-Duty Steel Frame: All-steel construction provides strength and durability for daily welding shop use.
• Three-Tier Shelf System: Top shelf sized for most small MIG welders, with middle and lower shelves for wire spools, grinders, clamps, and PPE.
• Dedicated Cylinder Shelf with Chains: Rear cylinder shelf and holding chains secure gas bottles, from small cylinders up to larger industrial sizes.
• Large Rear Wheels and Front Swivel Casters: Rear 6″ wheels support the load, while 2 1/4″ x 7/8″ front casters swivel for easy steering.
• Front Handle for Control: Integrated handle makes it easy to push, pull, or park the welding cart where you need it.
• MIG Gun and Ground Lead Holders: Built-in side holders keep the gun and ground cable off the floor, reducing wear and tripping hazards.
• Compact 24 3/4″ Height: Low profile keeps the weight down and improves stability while still giving good access to welder controls.
• Black Finish: Clean black look that blends into most professional welding and automotive shops.

PowerWeld CCMIG-B Black 3 Tray Welding Cart with Gas Cylinder Storage Includes

• (1) PowerWeld CCMIG-B Industrial MIG Cart frame
• (1) Top, middle, and bottom shelf set
• (1) Rear gas cylinder shelf
• (1) Set of cylinder holding chains
• (2) Rear wheels
• (2) Front swivel casters
• (1) Front handle
• (1) Hardware and fastener kit for assembly

PowerWeld CCMIG-B Black 3 Tray Welding Cart with Gas Cylinder Storage Specifications

• Brand: PowerWeld
• Model: CCMIG-B
• Product Type: Industrial MIG welding cart with gas cylinder storage
• Colour: Black
• Top Shelf Size: 17 3/4″ L x 11 1/4″ W
• Middle Shelf Size: 15 1/4″ L x 11 1/4″ W
• Bottom Shelf Size: 17 3/8″ L x 11 1/4″ W
• Cylinder Shelf Size: 10 1/2″ L x 11 1/4″ W
• Rear Wheels: 6″ x 1 1/4″
• Front Swivel Casters: 2 1/4″ x 7/8″
• Overall Height: 24 3/4″
• Package Dimensions: 28″ L x 13″ W x 5″ H
• Package Weight: 29.5 lb
• UPC: 775709900028

Why Customers Choose the PowerWeld Black 3 Tray Welding Cart with Gas Cylinder Storage

Welders choose the PowerWeld CCMIG-B because it gives them a sturdy MIG welding cart with real gas cylinder storage in a compact footprint. Instead of balancing a small MIG welder on a bench and leaving the gas bottle against a wall, this cart brings everything together: welder on top, gas cylinder on a dedicated shelf with chains, and tools on the remaining trays. For many shops, this makes setup faster and keeps the MIG welding station ready to roll wherever the next job is.

Crews also like how the cart handles daily use on concrete floors. The large rear wheels and front swivel casters move smoothly around vehicles, hoists, and tables, while the front handle gives good control when the welder and cylinder are loaded. Side holders keep the MIG gun and ground lead organized so they are not dragged on the floor. For small fabrication shops, home garages, and school welding labs that need a reliable welding cart with shelves and cylinder storage, the CCMIG-B offers a practical, easy-to-use solution.