Pica-Marker 2030 Pica-Powder Deep Hole Spray Marker Refill

Keep your Pica 2020 Deep Hole Spray Marker ready for layout with the Pica-Marker 2030 refill. This green fluorescent, chalk-based powder is formulated for precise, contactless marking through deep drill holes when used in the Pica-Powder 2020 system. One 45 g pack delivers 3 or more fillings, and each filling can deliver up to about 1,500 shots in the 2020 marker, so crews spend more time installing and less time refilling. The powder adheres to dry, damp, smooth, or rough materials—brick, wood, metal, plastic, tiles, plasterboard, glass, and rubber—leaving a clean, high-contrast dot that clearly shows hole location for anchors, brackets, and fixtures.

Because it’s chalk-based, marks are washable and rinsable, and can be removed from smooth, non-porous surfaces when the work is done. Paired with the 2020’s zero-gas, refillable pump and 360° rotatable spray arm, the 2030 refill extends the life of the tool while supporting fast, repeatable transfer marking in framing, electrical rough-in, plumbing penetrations, and general construction tasks.

Pica-Marker Pica-Powder Deep Hole Spray Marker Refill At a Glance

• Fluorescent green chalk powder: High-visibility dot for accurate transfer marking.
• 3+ fillings per pack: 45 g refill supports multiple loads in the Pica 2020 marker.
• Efficient output: Each filling can deliver up to ~1,500 shots in the deep hole spray marker.
• Washable/rinsable: Easy to remove from smooth, non-porous surfaces after installation.
• All-surface utility: Adheres on dry, wet, rough, or smooth materials.
• Designed for contactless marking: Works through the 2020’s 250 mm reach and 360° spray.
• Zero-Gas system compatible: Supports the refillable, propellant-free pump mechanism.
• Jobsite friendly pack: Durable refill container for clean handling.

Markets

• Carpentry & Framing: Transfer anchor and bracket locations through deep pilot holes.
• Electrical & Low-Voltage: Mark panel and box locations without removing fixtures.
• Plumbing & HVAC: Spot hangers and penetrations through sleeves and insulation.
• Masonry & Concrete: Precise anchor points on brick and block via templates.
• Metal Install & Fabrication: Align rails and hardware through pre-drilled metal.
• Facility Maintenance & Municipal: Quick, accurate markings in overhead and tight spaces.
• Trade Schools & Training Labs: Demonstrates safe, repeatable deep hole marking.

If your team relies on the Pica 2020 deep hole spray marker to print accurate center points, stocking the 2030 refill keeps that workflow moving. The fluorescent green chalk makes a crisp, readable dot that shows up on masonry, wood, coated metal, plastics, and tile—even when the surface is damp. With 3+ fillings per pack and up to roughly 1,500 shots per fill, installers can handle repetitive layouts without constant reloads. Marks are durable enough for drilling and fastening, yet they can be wiped from smooth surfaces after the job, protecting finished materials.

For contractors and service techs, the 2030 powder is an easy win: it extends the usefulness of a refillable, zero-propellant tool, reduces downtime, and supports fast, contactless marking in hard-to-reach areas. In training labs, it teaches a clean, repeatable method for transfer marking that translates directly to field work.

Pica-Marker 2030 Pica-Powder Deep Hole Spray Marker Refill Features

• Fluorescent Chalk Formula: Produces a clear, high-contrast dot for accurate alignment.
• Optimized for Pica 2020: Flows reliably through the zero-gas pump and 360° spray arm.
• Washable & Rinsable: Removes from smooth, non-porous surfaces after installation.
• All-Condition Performance: Adheres on dry, damp, rough, or smooth substrates.
• High-Yield Pack: 45 g provides 3+ fillings; great for repetitive layout tasks.
• Contactless Marking Support: Enables precise imaging of deep drill holes up to 250 mm (via the 2020 tool).

Pica-Marker 2030 Pica-Powder Deep Hole Spray Marker Refill Includes

• (1) Pica Powder Refill Pack, Fluorescent Green — 45 g
• Note: Pica-Powder Deep Hole Spray Marker sold separately

Pica-Marker 2030 Pica-Powder Deep Hole Spray Marker Refill Specifications

• Article Number: 2030
• Content: 45 g fluorescent green chalk powder
• Fill Count: 3+ fillings per pack (tool-dependent)
• Approx. Output per Filling (with 2020): Up to ~1,500 shots
• Compatibility: Pica 2020 Pica-Powder Deep Hole Spray Marker
• Marking Method: Contactless dot via spray burst (using the tool)
• Surface Suitability: Brick, wood, metal, plastic, tiles, plasterboard, glass, rubber; wet or dry
• Cleanability: Washable/rinsable; easy removal from smooth surfaces

Why Customers Choose the Pica-Marker Pica-Powder Deep Hole Spray Marker Refill

Crews choose the Pica Powder refill to keep a deep hole spray marker delivering accurate, contactless marking without downtime. The fluorescent green chalk shows clearly on tile, brick, wood, and coated metal, then wipes from smooth panels after drilling. With 3+ fillings in a 45 g pack and efficient output per fill, installers can layout anchors and brackets quickly, even in hard-to-reach spots served by the 2020’s 250 mm reach and 360° spray arm. It’s a practical way to maintain a refillable, zero-gas marking system that speeds alignment and reduces rework on fast-moving jobs.