Milwaukee 5150-20 M18 FUEL Cordless Branch Conduit Bender w/ AUTO-ZERO – Tool Only

Purpose-built for branch installations, the Milwaukee 5150-20 M18 FUEL™ Branch Conduit Bender brings cordless bending to commercial and industrial jobsites. Optimized for up to 1″ EMT and 3/4″ RMC, it lets electricians bend at the point of installation—no trips back to the shop bender, fewer setup steps, and faster multi-raceway work. The AUTO-ZERO™ sensor reads 0° automatically on every bend, helping keep stub-ups, offsets, and saddles consistent from pipe to pipe and over the tool’s life. A clear shoe/backformer orientation and an ergonomic working height keep layout marks and bend planes in view while you work.

Powered by the M18™ system, the POWERSTATE™ brushless motor and REDLINK PLUS™ electronics deliver repeatable performance and thermal protection. When paired with an M18™ XC5.0 battery (sold separately), the tool completes up to 110 bends on 3/4″ EMT on a single charge. The included tripod and backformer provide a stable platform for controlled bends, while wear-resistant reference charts support quick setup. For crews running EMT and RMC all day, this cordless conduit bender helps reduce rework and requires up to 10X less peak lower-back effort than hand bending.

Milwaukee M18 FUEL Cordless Branch Conduit Bender w/ AUTO-ZERO At a Glance

• AUTO-ZERO™ Accuracy: Automatically senses 0° before each bend for consistent results.
• Cordless Productivity: Bend at the install point to save trips and time on multi-raceway runs.
• Up to 110 Bends/Charge: With an M18™ XC5.0 battery on 3/4″ EMT for all-day workflow.
• Optimized Working Height: Keeps marks and bend planes visible from one ergonomic stance.
• Wear-Resistant Reference Chart: Quick angle and deduction lookups that stand up to jobsite use.
• POWERSTATE™ Brushless Motor: Reliable power for 1″ EMT and 3/4″ RMC branch work.
• REDLINK PLUS™ Intelligence: Monitors load to protect the tool and maintain performance.
• M18™ System Compatible: Works with the same batteries used across your M18™ tools.

Markets

• Commercial Electrical Contracting: Fast, repeatable bends across long conduit runs on active jobsites.
• Industrial Maintenance & Turnarounds: Controlled bends during equipment moves and line changes.
• Institutional & Healthcare Facilities: On-site bending with minimal disruption to building operations.
• Data Centers & Technology Builds: Consistent offsets and saddles for dense multi-raceway layouts.
• Municipal & Utility Services: Portable bending for field installations and service upgrades.
• Trade Schools & Apprenticeships: Teaches accurate bending with clear references and consistent zeroing.

Contractors need a conduit bender that keeps pace with tight schedules and repeatable quality. The Milwaukee 5150-20 provides cordless freedom without sacrificing accuracy, thanks to AUTO-ZERO™ sensing on every bend. Crews can stage the tripod where they’re working, keep marks in view, and move from stub-up to offsets without resetting a shop bender. With up to 110 bends per charge on 3/4″ EMT using an M18™ XC5.0 pack, teams can run a full sequence before swapping batteries. REDLINK PLUS™ protects the tool under load, while the brushless motor delivers consistent force for 1″ EMT and 3/4″ RMC. The result is fewer re-bends, less strain compared to hand bending, and a more predictable install from first run to final inspection.

Milwaukee 5150-20 M18 FUEL Cordless Branch Conduit Bender w/ AUTO-ZERO Features

• AUTO-ZERO™ Always Senses Zero, Most Consistent Bends
• Easiest Alignment, Fastest Bends Start To Finish
• Completes up to 110 Bends on 3/4” EMT Conduit when paired with a M18 XC5.0 Battery Pack (sold separately)
• 10X Less Peak Muscle Effort In Lower Back compared to hand bending
• Wear Resistant Reference Chart
• Only Compatible with Milwaukee® EMT/RMC Conduit Bending Shoes: 3/4” EMT / 1/2” RMC Conduit Bending Shoe, and 1” EMT / 3/4” RMC Conduit Bending Shoe, 1/2” EMT Conduit Bending Shoe (Sold Separately)
• Includes (1) 3/4” EMT / 1/2” RMC Conduit Bending Shoe (49-16-0034), (1) 1” EMT / 3/4” RMC Conduit Bending Shoe (49-16-0001), Tripod, and (1) Backformer
• REDLINK PLUS™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger
• REDLITHIUM battery technology: superior pack construction, electronics and performance deliver more work per charge and more work over pack life than nay battery on the market
• POWERSTATE Brushless Motor delivers longer life and higher performance
• 2-year tool warranty
• Fully compatible with the Milwaukee® M18™ System featuring over 275+ Solutions

Milwaukee 5150-20 M18 FUEL Cordless Branch Conduit Bender w/ AUTO-ZERO Includes

• (1) M18 FUEL™ BRANCH CONDUIT BENDER w/ AUTO-ZERO™
• (1) 3/4” EMT / 1/2” RMC Conduit Bending Shoe (49-16-0034)
• (1) 1” EMT / 3/4” RMC Conduit Bending Shoe (49-16-0001)
• (1) Tripod
• (1) Backformer
• Batteries & Charger Sold Separately

Milwaukee 5150-20 M18 FUEL Cordless Branch Conduit Bender w/ AUTO-ZERO Specifications

• Manufacturer’s Part #: 5150-20
• UPC: 0045242338313
• Battery System: M18™
• Battery Voltage: 18V
• Motor Type: POWERSTATE™ Brushless
• Bending Capacity: Up to 1″ EMT; up to 3/4″ RMC
• Bends per Charge: Up to (110) on 3/4″ EMT with M18™ XC5.0 (sold separately)
• Product Length: 28.6 in
• Product Width: 46.54 in
• Product Height: 39.5 in
• Product Weight: 41 lb
• Package Height (DPL): 24.33 in
• Package Width (DPL): 19.4 in
• Package Depth (DPL): 44.6 in
• Package Weight (DPL): 91.93 lb
• Compatibility: Milwaukee® EMT/RMC shoes (3/4″ EMT/1/2″ RMC; 1″ EMT/3/4″ RMC; 1/2″ EMT sold separately)
• Electronics: REDLINK PLUS™ Intelligence
• Reference Aids: Wear-resistant chart; visible shoe/backformer markings

Milwaukee 5150-20 M18 FUEL Cordless Branch Conduit Bender w/ AUTO-ZERO Warranty

• Milwaukee’s 2 Year Limited Warranty

Why Customers Prefer the Milwaukee M18 FUEL Cordless Branch Conduit Bender w/ AUTO-ZERO

Electricians select this cordless conduit bender to speed up branch work while keeping bends accurate. AUTO-ZERO™ reduces guesswork, and the working height with clear shoe/backformer alignment helps installers stay on mark through offsets and saddles. Because it runs on the Milwaukee M18™ platform, crews already invested in the system can use the same batteries across tools.

For contractors handling 1″ EMT and 3/4″ RMC on fast-moving projects, this auto-zero bender delivers controlled bends with less strain and less rework. The portability, bending consistency, and platform compatibility make it a practical upgrade over hand bending or stationary shop setups—especially for multi-raceway branch conduit installations. Customers often search for the Milwaukee Cordless Branch Conduit Bender by using: conduit bender, cordless conduit bender, Milwaukee M18, auto-zero bender, branch conduit tool, cordless bending.