Milwaukee 48-22-1426 8m/26ft EXO360 STUD Tape Measure

The Milwaukee 48-22-1426 8m/26ft STUD™ Tape Measure is built for demanding jobsites where measuring tools take a beating. Its EXO360™ rip- and wear-resistant blade technology helps prevent tearing and abrasion when the blade drags across concrete, metal studs, or debris. A fully reinforced, impact-resistant body protects internal components from drops and daily knocks, while a finger stop gives you safe, controlled retraction at the end of each pull. With a hi-visibility blade and two-sided printing, readings are easy to see whether you’re marking floor layout, overhead runs, or tight interiors.

This retractable tape measure delivers 17′ of reach and 14′ of standout so one person can span longer distances for framing, layout, or mechanical runs. The first 6″ of the blade are reinforced on both sides with an anti-tear coating, extending service life where most tapes fail. A wire-form belt clip reduces pocket wear, and a lanyard loop lets crews tether the tool when working at height. SAE and metric markings (8 m/26 ft) cover mixed-standard jobs without switching tools.

Milwaukee 8m/26ft EXO360 STUD Tape Measure At a Glance

• EXO360™ Blade: Resists rips and wear for longer blade life in rough conditions.
• 17′ Reach / 14′ Standout: Measure longer spans solo on layout and framing.
• Reinforced Housing: Impact-resistant body protects against daily drops.
• Double-Sided Anti-Tear (First 6″): Extra protection where tapes commonly fail.
• Finger Stop Control: Safer, smoother blade retraction.
• Hi-Vis, Two-Sided Printing: Faster reads in low light and awkward angles.
• Architectural Scale: Useful for layout, design, and takeoffs.
• Wire-Form Belt Clip & Lanyard Loop: Quick carry with less pocket tearing and easy tethering.

Markets

• Construction & Framing: Long reach and standout for wall, floor, and roof layout.
• Renovation & Remodeling: Quick, readable measurements in tight interiors.
• Electrical & HVAC: Span runs for conduit, duct, and hanger spacing.
• Plumbing & Mechanical: Verify pipe lengths and fixture spacing with SAE/metric in one tool.
• Carpentry & Cabinetry: Precise, clear marks on finish installs and millwork.
• Municipal & Facility Maintenance: Durable measuring for daily repair tasks across sites.
• Trade Schools & Training Labs: Teaches safe retraction and accurate reading with dual scales.

Crews who work around debris, dust, and drop hazards need a tape that keeps performing. The Milwaukee 48-22-1426 STUD meets that demand with EXO360™ blade protection and a reinforced housing that stands up to daily use. Its 17′ reach and 14′ standout make one-person pulls practical on framing and layout, reducing trips and saving time. Hi-vis markings and two-sided printing speed up reads whether you’re measuring overhead unistrut or floor layout lines.

For electricians, HVAC techs, plumbers, and general contractors, the finger stop improves control at retraction, helping prevent blade slap and hand injuries. The double-sided anti-tear coating on the first 6″ protects the workhorse end of the blade, while the wire-form clip and lanyard loop make carry and tethering simple on busy jobsites.

Milwaukee 48-22-1426 8m/26ft EXO360 STUD Tape Measure Features

• EXO360™ Rip & Wear Resistant Blade Technology
• Up to 17′ of Reach
• Fully Reinforced Body survives 80 foot drop**
• Finger stop delivers tape retraction control
• 2-Sided Printing For Easy Reading
• Architectural Scale
• Wire Form Belt Clip Reduces Pocket Tearing
• Lanyard-Ready for Quick and Easy Tethering
• Geared Design for Smaller Size
• Anti-Tear Coating Reinforces the First 6″ of the Tape Blade
• Most Durable Tape Measure.
• Smoothest Retraction in Harsh Jobsite Conditions

Milwaukee 48-22-1426 8m/26ft EXO360 STUD Tape Measure Includes

• (1) Milwaukee 48-22-1426 8m/26ft STUD™ Tape Measure

Milwaukee 48-22-1426 8m/26ft EXO360 STUD Tape Measure Specifications

• MFG Part #: 48-22-1426
• Tape Blade Length: 26 ft (8 m)
• Measurement Standard: SAE and Metric
• Standout: 14 ft
• Reach: 17 ft
• Tape Type: Retractable
• Material Composition: Steel
• Assembled Depth: 2.6 in
• Assembled Height: 7.01 in
• Assembled Width: 1.32 in
• Assembled Weight: 1.32 lb
• Packaged Depth: 2.677 in
• Packaged Height: 7.087 in
• Packaged Width: 4.331 in
• Packaged Weight: 1.323 lb
• Printing: 2-Sided; Hi-Vis; Architectural scale
• Clip/Tethering: Wire-form belt clip; Lanyard loop

Milwaukee 48-22-1426 8m/26ft EXO360 STUD Tape Measure Warranty

• Milwaukee’s Limited Lifetime Warranty

Why Customers Choose the Milwaukee 8m/26ft EXO360 STUD Tape Measure

Installers and framers pick the Milwaukee STUD tape measure for dependable performance on real jobsites. The EXO360™ blade stands up to concrete, steel edges, and daily abrasion, so crews spend less time swapping out a worn tape. The 14′ standout and 17′ reach let one person handle longer spans during layout, cutting down on extra trips or a second set of hands. With a hi-vis, two-sided blade and architectural scale, readings are quick whether the task is wall layout, conduit spacing, or cabinet install.

For mixed-standard work, the 8 m/26 ft retractable tape measure shows metric and SAE clearly, reducing conversion mistakes and rework. The finger stop adds control during retraction, and the reinforced body handles the drops that happen on busy sites. It’s a durable, easy-to-read measuring tool that helps crews work faster and with fewer interruptions.