Milwaukee 3696-22 M18 Fuel Hammer Drill & Impact Driver Kit /w One-Key (2) 5AH

Milwaukee 3696-22 M18 FUEL 18V Hammer Drill & Impact Driver Combo Kit with ONE-KEY and (2) 5.0Ah Batteries

The Milwaukee 3696-22 M18 FUEL™ 2-Tool Combo Kit with ONE-KEY™ pairs Milwaukee’s most powerful cordless hammer drill with its fastest driving impact driver, giving professional users a high-output setup for demanding drilling and fastening work. Designed for construction, mechanical, electrical, and maintenance tasks, this kit delivers strong performance under load while maintaining compact tool sizes for better control in tight spaces.

The M18 FUEL™ 1/2″ Hammer Drill/Driver delivers up to 1,400 in-lbs of torque and is capable of drilling 2-9/16″ self-feed holes in dense materials. Measuring only 6.9 inches in length, it provides excellent access in confined areas. The built-in AUTOSTOP™ Control Mode helps reduce the risk of injury by limiting tool rotation during bind-ups, making it well suited for repetitive overhead or high-torque drilling.

The M18 FUEL™ 1/4″ Hex Impact Driver delivers up to 2,000 in-lbs of torque with speeds up to 3,900 RPM, allowing fast installation of structural fasteners, lag bolts, and self-tapping screws. ULTIMATE TRIGGER CONTROL provides smooth acceleration for small fasteners, reducing stripping and material damage. Both tools feature ONE-KEY™ technology, allowing users to customize settings, track tools, and lock them out if lost or stolen. The kit includes two REDLITHIUM™ XC 5.0Ah batteries, a multi-voltage charger, and a molded carrying case for jobsite transport.

Milwaukee M18 Fuel Hammer Drill & Impact Driver Kit with One-Key At a Glance

• POWERSTATE™ Brushless Motors: Deliver high torque and sustained performance under load
• AUTOSTOP™ Control Mode: Helps reduce over-rotation during bind-ups for added safety
• ULTIMATE TRIGGER CONTROL: Allows precise fastening without stripping or damage
• Compact Tool Design: 6.9″ drill and 4.47″ impact for tight work areas
• 4-Mode DRIVE CONTROL™: Adjusts speed and power for different fastening tasks
• ONE-KEY™ Enabled: Customize settings, manage inventory, and lock tools remotely
• REDLITHIUM™ XC 5.0Ah Batteries: Provide longer runtime and consistent power output

Markets

• Construction and Renovation: Used for drilling concrete anchors, framing fasteners, and structural connections
• Electrical Contractors: Suitable for panel installs, conduit supports, and electrical fastening work
• Plumbing and Mechanical Trades: Handles dense wood drilling, self-feed bits, and pipe supports
• Automotive and Fleet Maintenance: Ideal for fastener removal, installations, and equipment repairs
• Facility Maintenance Teams: Useful for daily repairs, upgrades, and hardware installation
• Trade Schools and Training Programs: Supports hands-on instruction with safety and tracking features

Contractors and trade professionals rely on the Milwaukee 3696-22 combo kit to handle high-torque drilling and fast fastening without carrying multiple tools. The hammer drill provides strong performance for masonry and dense materials while remaining compact enough for overhead and confined applications. The impact driver delivers fast installation speeds while maintaining control for delicate fastening tasks.

For crews managing multiple tools across jobsites, ONE-KEY™ technology adds value by allowing tools to be tracked, customized, and locked if misplaced. Maintenance teams benefit from reduced downtime thanks to long-lasting XC 5.0Ah batteries, while installers appreciate the balanced design that helps reduce fatigue during extended use. This kit offers dependable performance for daily jobsite demands without unnecessary complexity.

Milwaukee 3696-22 M18 Fuel Hammer Drill & Impact Driver Kit /w One-Key (2) 5AH Features

• POWERSTATE™ Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
• POWERSTATE™ Brushless Motor delivers unmatched power for full range of capability to complete the widest variety of applications
• Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
• Drill is only 6.9″ in length for access into tight spaces and reduced fatigue
• ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
• Fastest Drilling and Driving applications under load
• AUTOSTOP Feature to Protect from over rotation in a bind up for enhanced safety, equipped with a dedicated AUTOSTOP light on foot of tool to indicate a protection event
• Impact is only 4.47″ for access in tight spaces4-Mode Drive Control2000 in-lbs of torque
• Mechanical Clutch for consistency  in driving a wide range of fasteners
• Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
• Up to 3900 RPM for the Impact Driver
• Single Handed Bit Insertion for Ease of Use

Milwaukee 3696-22 M18 Fuel Hammer Drill & Impact Driver Kit /w One-Key (2) 5AH Includes

• (1) M18 FUEL™ 1/2″ Hammer Drill/Driver w/ ONE-KEY™ (2906-20)
• (1) M18 FUEL™ 1/4″ Hex Impact Driver w/ ONE-KEY™ (2957-20)
• (2) M18™ REDLITHIUM™ XC 5.0Ah Battery Packs (48-11-1850)
• (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)
• (1) Side Handle
• (1) Blow Molded Carrying Case
• (2) Belt Clips

Milwaukee 3696-22 M18 Fuel Hammer Drill & Impact Driver Kit /w One-Key (2) 5AH Specifications

• 2PC Combo Kit Information
  • Manufacturer Part Number (OEM): 3696-22
  • GTIN: 00045242795925
  • Battery Voltage: 18V
  • Battery Capacity: 5.0Ah
  • Number of Batteries Included: (2)
  • Charger Included: Yes
  • Tool Management: ONE-KEY™ Enabled
  • Product Type: Hammer Drill / Impact Driver Combo Kit
• Hammer Drill Specifications – 2906-20
  • Maximum Torque: 1,400 in-lbs
  • Speed Range: 0–2,100 RPM
  • Hammer Mode: Yes
  • Chuck Size: 1/2 in All-Metal Ratcheting
  • Length: 6.9 in
  • Weight (Tool Only): 3.4 lbs
• Impact Driver Specifications – 2957-20
  • Maximum Torque: 2,000 in-lbs
  • Speed Range: 0–3,900 RPM
  • Impact Rate: 0–4,400 IPM
  • Drive Size: 1/4 in Hex
  • Length: 4.47 in
  • Weight (Tool Only): 2.3 lbs

Milwaukee 3696-22 M18 Fuel Hammer Drill & Impact Driver Kit /w One-Key (2) 5AH Warranty

• Milwaukee’s 5 Years (Tool), 3 Years (Battery) Limited Warranty

Why Customers Choose the Milwaukee M18 Fuel Hammer Drill & Impact Driver Kit with One-Key

Professionals choose the Milwaukee 3696-22 because it delivers dependable power and control for everyday drilling and fastening tasks. The M18 FUEL hammer drill provides the torque needed for masonry and dense wood while remaining compact for tight spaces, reducing fatigue during long workdays. The impact driver’s fast driving speed and controlled trigger response help installers work efficiently without damaging fasteners or materials.

With ONE-KEY™ technology, crews can manage tools across multiple jobsites, customize performance settings, and protect their investment through remote lockout. Paired with M18 REDLITHIUM XC 5.0Ah batteries, this drill combo kit supports consistent runtime and reliable performance, making it a practical choice for contractors, maintenance teams, and skilled trades that depend on cordless tools daily.