Milwaukee 2933-20 M18 FORCE LOGIC Single Channel Strut Shear – Tool Only

The Milwaukee 2933-20 M18™ FORCE LOGIC™ Single Channel Strut Shear is built for fast, repeatable strut cuts at the point of installation—on floors, lifts, or from a chain vice—without sending material to a chop saw or band saw station. Using Milwaukee® proprietary Shearing Dies, the tool produces square, installation-ready cuts that typically require no filing or deburring, helping crews hang more strut, faster. A built-in strut support plate provides a quick 4 in / 10 cm offset reference so installers can measure and shear with fewer tape pulls and less rework. The dual-die, no-exposed-blade design helps reduce laceration risk compared to open-blade methods, while auto ram return and a two-stage trigger streamline the next cut setup.

Highly portable and chain-vice friendly, the Strut Shear can operate on any flat surface or mount directly to a tri-stand chain vice (any brand) using the integrated interface. Dual LEDs light both sides of the die set for better alignment. ONE-KEY™ adds digital fleet features—usage viewing, maintenance reminders, and remote lockout for theft deterrence. On an M18™ XC 5.0Ah pack (sold separately), users can expect 250+ shears on 1-5/8″ pre-galvanized single-channel strut, keeping productivity high on long hanger runs or trapeze assemblies. The kit includes (1) 1-5/8″ × 1-5/8″ Single Channel Shearing Die and a soft contractor bag with room for (3) additional die sets to cover common channel sizes.

Milwaukee M18 FORCE LOGIC Single Channel Strut Shear At a Glance

• Installation-Ready Cuts: Proprietary Shearing Dies deliver square shears with no filing or deburring.
• Built-In 4 in / 10 cm Offset: Strut support plate speeds measuring for consistent, repeatable shears.
• No Exposed Blades: Dual-die design helps reduce cut/laceration risks on busy jobsites.
• Chain Vice Integration: Tri-stand chain vice mount works with any brand for fixed-station productivity.
• Portable Point-of-Install Shearing: Shear on any flat surface or at the work location—reduce trips to the saw.
• Tool-Free Die Change: Die Retention Arm enables quick swaps between single-channel die sets.
• Auto Ram Return + Two-Stage Trigger: Faster setup for the next cut; trigger lights LEDs without cycling the ram.
• ONE-KEY™ Enabled: View usage, receive maintenance reminders, and lock out the tool for security

Markets

• MEP & Commercial Construction Fast hanger and trapeze fabrication on large projects.
• Industrial Facilities & Maintenance In-place strut modifications during shutdowns with minimal hot-work exposure.
• Electrical Contractors Clean single-channel strut cuts for cable tray supports and panel racking.
• HVAC & Plumbing Quick, repeatable strut for duct, pipe, and equipment supports.
• Municipal & Institutional Campuses On-site rack/facility upgrades where debris and sparks must be minimized.
• Trade Schools & Training Centers Demonstrates safe, repeatable shearing and measurement practices.

Contractors lose time walking to stationary saws, cleaning burrs, and managing blade debris. The M18 strut shear moves the cut to the install location, producing square, burr-free ends that drop straight into fittings—no touch-ups, less cleanup. The 4 in / 10 cm offset plate turns repetitive lengths into a quick press-and-shear rhythm, while auto ram return sets the tool for the next piece immediately. With no exposed blades, crews lower laceration risk and reduce airborne metal dust common with abrasive cutting. When a fixed workstation helps, the chain vice mount ties into any tri-stand to create a fast, stable shearing station. ONE-KEY keeps fleets organized with usage history, service reminders, and lockout for lost or off-site tools.

Milwaukee 2933-20 M18 FORCE LOGIC Single Channel Strut Shear – Tool Only Features

• Strut Support plate offers a quick 4in/10cm measurement offset for simple, repeatable shears.
• No exposed blades.
• Installation ready cuts with no filing and deburring.
• Tri-Stand chain vice mount allows easy integration into any brand chain vice.
• 250+ shears on 1-5/8” Pre-Galv Strut on a single M18 XC 5.0ah charge (sold seprately).
• Die Retention Arm allows for tool free die change.
• Two Stage Trigger activates the LEDs without activating the tool.
• Dual LEDs provide light to both sides of the head to properly illuminate the working area.
• Auto ram return on trigger release allows for instant set up for your next shear.
• Trigger Lock Out prevents unwanted tool activation in transport, set up, and tear down.
• Compatible with ALL M18™ Batteries and Chargers.

Milwaukee 2933-20 M18 FORCE LOGIC Single Channel Strut Shear – Tool Only Includes

• (1) M18™ FORCE LOGIC™ Strut Shear
• (1) 1-5/8″ x 1-5/8″ Single Channel Shearing Dies
• (1) Contractor Bag with Die Pockets
• Tool Only – Battery and charger sold separately

Additional die sets available: 13/16″ × 1-5/8″ (49-16-1316), 7/8″ × 1-5/8″ (49-16-0078), Combo 13/16″ & 1-5/8″ (49-16-1513), Combo 7/8″ & 1-5/8″ (49-16-1578).

Milwaukee 2933-20 M18 FORCE LOGIC Single Channel Strut Shear – Tool Only Specifications

• MFG Part # (OEM): 2933-20
• GTIN: 00045242548835
• Power Source: Electric — Cordless (M18™)
• Cordless/Corded: Cordless
• Shear Usage: Metal (single-channel strut)
• Maximum Gauge Capacity: 12 ga (material/brand dependent)
• Minimum Cut Radius: 0 in (straight shears)
• Variable Speed: No
• Auto Return: Yes
• LED Worklights: Dual LEDs
• Handle Material: Rubber
• Housing Material: Glass-Filled Nylon
• Switch Type: Trigger with Lock Out
• Head/Die Illumination: Dual-side coverage
• Net Tool Weight (Excluding Battery): 24.0 lb
• Assembled Dimensions (L × W × H): 17.5 × 7.63 × 9.59 in
• Package Dimensions (L × W × H): 21.77 × 15.15 × 12.16 in
• Package Weight: 31.48 lb
• Battery Voltage: 18V (Lithium-Ion)
• Number of Batteries Included: (0)
• Charger Included: No
• Certifications: UL Listed; CSA/ETL: No
• ONE-KEY™ Capabilities: Usage view, maintenance notifications, remote lockout
• System Compatibility: Compatible with ALL M18™ Batteries & Chargers

Milwaukee 2933-20 M18 FORCE LOGIC Single Channel Strut Shear – Tool Only Warranty

• Milwaukee’s 5-Year Limited Warranty

Why Customers Choose the Milwaukee M18 FORCE LOGIC Single Channel Strut Shear

Installers pick this single channel strut shear to speed hanger fabrication and reduce cleanup. Instead of walking to a band saw or abrasive saw, they shear strut at the point of install, which shortens layout-to-hang time and keeps work areas cleaner. The no-exposed-blade design is safer around other trades, and the 4 in / 10 cm offset plate turns repetitive cuts into a consistent process. For longer runs, the chain vice mount creates a stable station without dedicated shop tools. ONE-KEY helps foremen track usage and schedule service, while the M18 cordless platform means the same packs used for drills and impacts power the shear, simplifying battery logistics.

Milwaukee 2933-20 M18 FORCE LOGIC Single Channel Strut Shear – Tool Only Videos

Milwaukee 2933-20 M18 FORCE LOGIC Single Channel Strut Shear – Tool Only Notes for Buyers (quick tips)

• Confirm Die & Strut Match: Use the correct single-channel shearing die for your strut profile (1-5/8″, 7/8″, 13/16″, or combo). Mixing sizes can deform channel lips.
• Use the 4 in / 10 cm Offset: For repetitive lengths, set your measurement once and index off the plate—fewer tape pulls, more uniform hangers.
• Square-Up the Channel: Keep the strut web flat on the support plate; if using a chain vice, clamp just tight enough to prevent twist.
• Mind the Finish: For pre-galvanized or painted strut, clean chips from the die faces; avoid dragging cut ends across coated surfaces.
• Let Auto Return Work: Release the trigger fully to reset the ram before inserting the next piece—this prevents partial strokes.
• Lighting & Visibility: Tap the two-stage trigger to light the work area without moving the ram; verify alignment before the cut.
• Transport Safety: Engage the trigger lock out when moving between stations or hoisting to lifts.
• Maintenance: Wipe die faces after dusty cutting; inspect for nicks. Replace worn dies to maintain square, burr-free shears.
• Production Tip: For long runs, mount to a tri-stand chain vice and stage material on roller stands to maximize throughput.