Milwaukee 2922-22M M18 FORCE LOGIC Press Tool Kit w/ One-Key, 1/4″ – 7/8″ Streamline ACR Jaws (2) 2AH

Built for refrigerant line installs, the Milwaukee 2922-22M pairs the M18™ FORCE LOGIC™ Press Tool w/ ONE-KEY™ with 1/4″–7/8″ Streamline™ ACR jaws to deliver flame-free refrigerant line connections without brazing. The in-line body and forward hand position make one-hand presses practical in ceiling cavities, racks, and tight equipment rooms. A brushless motor and REDLINK™ electronics maintain consistent output, while Auto-Cycle completes each press and the pre-press battery check prevents partial cycles. ONE-KEY adds remote tracking, management, and lockout, plus press logging and job reports from mobile or desktop. For HVAC contractors shifting from torch work, this kit removes nitrogen purges and silver solder from most lineset joints while maintaining the control and documentation GC’s and facility owners expect. The six included Streamline ACR jaws cover common sizes; the 1-1/8″ OD ring and adapter jaw are available separately for larger work. Two M18 REDLITHIUM™ CP2.0 batteries, a multi-voltage charger, and a hard case round out a job-ready setup.

Milwaukee 1/4″ – 7/8″ Streamline ACR Jaws M18 FORCE LOGIC Press Tool Kit At a Glance

• Flame-Free Refrigerant Lines: Presses ACR tube to Streamline™ ACR fittings—no brazing, purge gas, or silver solder.
• In-Line, One-Hand Design: Reaches where your arm fits for faster setups in tight spaces.
• Auto-Cycle + Battery Check: Confirms a full press and blocks cycles the tool can’t finish.
• ONE-KEY Tracking & Reports: Log every press, manage assets, and enable remote lockout.
• ACR Coverage (Included): 1/4″–7/8″ OD; 1-1/8″ OD ring/adapter sold separately.
• Brushless Motor + REDLINK: Steady performance and protection under load.
• M18 System: Runs on the same batteries as your other M18 tools; (2) CP2.0 packs included.
• Broad Tool Capacity: Tool supports up to 4″ (material/jaw dependent) for wider system use.

Markets

• HVAC/R Installation: Linesets on split, VRF/VRV, and rooftop systems without open flame.
• Commercial Refrigeration: Clean, repeatable joints in kitchens, grocery, and cold rooms.
• Residential HVAC: Faster change-outs and service with less cleanup.
• Facility Maintenance: Documented connections and tool control across campuses.
• Industrial MRO: Predictable results during shutdowns and line moves.
• Mechanical Contractors: Press documentation for QC and turnover packages.

Brazing slows schedules and adds risk. With the M18 press tool and Streamline ACR jaws, crews make flame-free refrigerant line connections that are fast, consistent, and easy to verify. The in-line form helps one tech work overhead or in racks, while Auto-Cycle and pre-press battery check reduce rework. ONE-KEY closes the loop with tracking, geofencing, lockout, and press logs you can attach to close-out documents. For common ACR sizes, the included 1/4″–7/8″ jaws keep most installs moving; step up to 1-1/8″ later with the ring and adapter if needed. Backed by the M18 battery platform, this kit gives HVAC and mechanical contractors a practical path away from torches while meeting documentation requirements on modern jobs.

Milwaukee 2922-22M M18 FORCE LOGIC Press Tool Kit w/ One-Key, 1/4″ – 7/8″ Streamline ACR Jaws (2) 2AH Features

• Lightest, In-Line Design for Unrivaled Access
• Auto-Cycle ensures full press every time
• Industry’s first brushless press tool
• Prepress Battery check ensures tool won’t start a press it can’t complete
• Jaws Compatible with Streamline ACR Press Fittings
• Flame-Free Refrigerant Line Connections
• Faster Alternative to Brazing
• 1/4″ OD – 7/8″ OD Capacity
• 1-1/8″ OD Ring and Adapter Jaw Sold Separately
• Jaws Compatible with ACR Tube & Line Set
• Creates Secure Joints in One Cycle
• Monitor & Report Successful Operation from Desktop & Mobile Devices
• Only Press Tool with Security Capability
• ONE-KEY Industry’s Largest Tracking Network

Milwaukee 2922-22M M18 FORCE LOGIC Press Tool Kit w/ One-Key, 1/4″ – 7/8″ Streamline ACR Jaws (2) 2AH Includes

• (1) M18™ FORCE LOGIC™ Press Tool (2922-20)
• (2) M18™ REDLITHIUM™ CP2.0 Battery Packs (48-11-1820)
• (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)
• (1) 1/4″ Streamline™ ACR Jaw (49-16-2650M)
• (1) 3/8″ Streamline™ ACR Jaw (49-16-2652M)
• (1) 1/2″ Streamline™ ACR Jaw (49-16-2653M)
• (1) 5/8″ Streamline™ ACR Jaw (49-16-2654M)
• (1) 3/4″ Streamline™ ACR Jaw (49-16-2655M)
• (1) 7/8″ Streamline™ ACR Jaw (49-16-2656M)
• (1) Streamline™ ACR Press Gauge
• (1) Hard Carrying Case

Milwaukee 2922-22M M18 FORCE LOGIC Press Tool Kit w/ One-Key, 1/4″ – 7/8″ Streamline ACR Jaws (2) 2AH Specifications

• Manufacturer’s Part #: 2922-22M
• UPC / GTIN: 045242576449 / 00045242576449
• Battery System / Voltage: M18™ / 18V
• Tool Dimensions (L × H × W): 14.17″ × 4.5″ × 3.14″
• Net Tool Weight: 5.6 lb
• Press Capacity (Tool): Up to 4″ (material/jaw dependent)
• Included ACR Jaw Range: 1/4″–7/8″ OD
• Cordless / Case / Charger: Yes / (1) / (1)
• Color: Red/Black
• UL Listed: Yes
• Package Dimensions (W × H × D): 25.45″ × 6.50″ × 16.47″
• Package Weight: 48.4 lb

Milwaukee 2922-22M M18 FORCE LOGIC Press Tool Kit w/ One-Key, 1/4″ – 7/8″ Streamline ACR Jaws (2) 2AH Warranty

• Milwaukee’s 5 Years Limited Tool, 2 Years Limited Battery Warranty

Why Professionals Use the Milwaukee M18 FORCE LOGIC Press Tool Kit w/ One-Key, 1/4″ – 7/8″ Streamline ACR Jaws

Installers choose this kit to move away from brazing on linesets while keeping quality measurable. The Streamline ACR jaws make tight, flame-free connections on the sizes techs see most, and the in-line M18 press tool supports one-hand work in crowded ceilings and racks. Auto-Cycle and the battery check help avoid incomplete joints, and ONE-KEY provides tracking, lockout, and press logs that simplify close-out and service records. For everyday ACR work from 1/4″ to 7/8″, it keeps copper pressing consistent, clean, and efficient—powered by the batteries crews already carry.