Milwaukee 2777-20 M18 FORCE LOGIC 1590 ACSR Cable Cutter – Tool Only

The Milwaukee 2777-20 M18™ FORCE LOGIC™ 1590 ACSR Cable Cutter is built for transmission and distribution work where fast setup, mid-span access, and clean cuts drive productivity. A patent-pending jaw allows the head to open with two fingers, so linemen can position the cutter precisely—even with Class 3 gloves. Once positioned, the conductor auto-closes the jaw for hands-free latching, making mid-span cuts simpler on bundled lines, spans, and tight hardware. A 9-ton hydraulic system powered by a POWERSTATE™ brushless motor and managed by REDLINK™ electronics delivers fast cycle times and reliable cutting force in harsh conditions. The fully enclosed high-speed hydraulic pump keeps debris out, and ONE-KEY™ adds fleet tracking, usage history, maintenance reminders, and remote lockout.

Designed around real field handling, the 2777-20 balances cutting force with control. Milwaukee lists the transmission cutter as the fastest in its class, helping crews finish wire removals, reconductoring, and storm restoration with fewer delays. With an M18™ battery (sold separately), linemen get the portability to work from a bucket, pole, or tower without generators or hoses.

Milwaukee M18 FORCE LOGIC 1590 ACSR Cable Cutter At a Glance

1590 ACSR Capacity: Cuts up to 1590 Falcon ACSR and 1/2″ EHS guy wire for transmission tasks.
Two-Finger, Auto-Close Jaw: Quick open; conductor auto-closes the jaw for hands-free mid-span latching.
Fast 9-Ton Hydraulic System: High-speed pump drives rapid cutting cycles for less time aloft.
Balanced Field Handling: Designed for control with gloves; reduces fatigue during repetitive cuts.
Sealed Hydraulics + Brushless Drive: Built for reliability in wet, dusty, and cold/hot environments.
REDLINK™ Electronics: Protects tool and pack under heavy load; consistent performance cut after cut.
ONE-KEY™ Enabled: Track usage, get maintenance alerts, and lock out the tool for security.
M18™ System: Runs on the same batteries used across 200+ Milwaukee M18™ tools.

Markets

Transmission & Distribution Utilities Fast mid-span and dead-end cuts during maintenance and storm response.
Contract Line Crews Reconductoring and removal where portable, hose-free cutting is preferred.
Municipal & Co-Op Utilities Fleet-tracked cutting for asset control and service documentation.
Industrial Facilities & Rail High-capacity cable cutting during shutdowns and expansions.
Renewable Energy (Wind/Solar) Large-conductor removal and rework on collector systems and substations.
Trade Schools & Apprenticeships Hands-on training for safe hydraulic cable cutting practices.

Line crews need a battery-powered cable cutter that sets up quickly and cuts transmission conductors without wrestling with latches or hoses. The 2777-20’s two-finger opening and auto-close action simplify mid-span work—especially with heavy gloves—while the 9-ton hydraulic drive powers through 1590 ACSR and 1/2″ EHS cleanly. A sealed hydraulic system and brushless motor keep performance consistent in rain, dust, and temperature swings, and REDLINK helps protect components under load. With ONE-KEY, supervisors can view usage, schedule service, and lock a missing tool—useful for large fleets spread across multiple jobs. Running on the M18 platform, this cordless ACSR cutter delivers speed, control, and traceability that reduce downtime on restoration or upgrade work.

Milwaukee 2777-20 M18 FORCE LOGIC 1590 ACSR Cable Cutter – Tool Only Features

Cuts up to 1590 Falcon ACSR, and 1/2″ EHS Guy Wire
Patent pending jaw design enables opening with just two fingers, enhancing alignment while delivering easiest operation with Class 3 Gloves
Wire automatically closes the jaw, providing hands-free jaw closure and the easiest mid-span cutsFully balanced design delivers the best control
Powerful 9T hydraulic pump delivers the fastest transmission wire cuts for enhanced productivity
Fully enclosed high speed hydraulic pump, Brushless Motor, REDLINK™ Electronics and REDLITHIUM™ Battery combine to deliver ultimate reliability in the toughest conditions
Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life.
REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
Milwaukee® ONE KEY™ Technology allows Linemen to view tool usage, receive notifications for recommended maintenance, and sync information wirelessly to the cloud
Part of the M18™ System, featuring over 200+ tools

Milwaukee 2777-20 M18 FORCE LOGIC 1590 ACSR Cable Cutter – Tool Only Includes

- (1) M18™ FORCE LOGIC™ 1590 ACSR Cable Cutter (2777-20)
- (1) Carabiner
- (1) Inverter
- (1) Utility Bag
- Tool Only – Battery and charger sold separately

Milwaukee 2777-20 M18 FORCE LOGIC 1590 ACSR Cable Cutter – Tool Only Specifications

MFG Part # (OEM): 2777-20
UPC / GTIN: 045242549702 / 00045242549702
Cutting Capacity: Up to 1590 Falcon ACSR; 1/2″ EHS guy wire
Hydraulic Force: 9 Ton (hydraulic)
Power Source: Electric — Cordless (M18™)
Battery Voltage: 18V (Lithium-Ion)
Number of Batteries Included: (0)
Charger Included: No
Tool Length: 12.70 in
Tool Width: 18.60 in
Tool Height: 10.60 in
Weight (Excluding Battery): 11.75 lb
Assembled Dimensions (L × W × H): 12.7 × 18.6 × 10.6 in
Package Dimensions (H × W × D): 24.44 × 12.67 × 18.77 in
Package Weight: 21.8 lb
Tool Type: Cable Cutter (hydraulic)
Color / Finish: Red
System Compatibility: Part of the M18™ System (200+ tools)

Milwaukee 2777-20 M18 FORCE LOGIC 1590 ACSR Cable Cutter – Tool Only Warranty

Milwaukee’s 5 Year Limited Warranty

Why Professionals Choose The Milwaukee M18 FORCE LOGIC 1590 ACSR Cable Cutter

Linemen pick this battery-powered ACSR cutter for fast mid-span access and reliable force on transmission conductors. The two-finger opening with auto-close reduces fumbling around spacers or dampers, and the 9-ton hydraulic system powers through 1590 ACSR and 1/2″ EHS consistently. A sealed hydraulic pump and brushless motor support long life outdoors, while REDLINK protects the tool and pack during heavy cuts. With ONE-KEY, supervisors can track usage and schedule maintenance. Crews already on the M18 platform get cordless convenience with the control and cutting capacity needed for restoration work, reconductoring, and upgrades.

Milwaukee 2777-20 M18 FORCE LOGIC 1590 ACSR Cable Cutter – Tool Only Notes for Buyers (quick tips)

Capacity Check: Confirm conductor spec (e.g., 1590 Falcon ACSR) and guy wire diameter (1/2″ EHS) before cutting. For compacted or unusual strands, verify with your standards group.
Mid-Span Technique: Use the two-finger open to position the head, then let the auto-close engage around the conductor. Keep the line centered in the jaw to prevent skew.
Glove-On Control: The jaw and trigger layout is designed for Class 3 gloves—practice opening/closing on scrap before going aloft.
Staging & Tethering: Use the carabiner to secure the tool in the bucket or on a lift; avoid hanging by the battery.
Cut Planning: De-energize and bond per utility procedure. For bundled conductors, maintain spacings and hardware orientation during removal.
Cycle Discipline: Allow the ram to complete and retract fully before repositioning; partial cycles can leave high-strand burrs.
Maintenance: Wipe the head after gritty cuts; inspect for strand shards. Check the jaw pivot and seals; keep the inverter and bag dry.