Makita TW011GZ 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench, Tool Only

The Makita TW011GZ 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench is built for heavy-duty fastening and loosening work in truck service, equipment maintenance, steel erection, and industrial repair. Designed around a Makita purpose-built brushless motor, this cordless impact wrench delivers up to 1,110 ft-lbs of maximum fastening torque and up to 1,400 ft-lbs of nut-busting torque in reverse. Its 5-7/16″ long anvil with 3/4″ square drive is especially useful for reaching bolts and nuts in recessed areas, including applications such as rear truck wheels and other deep-access fastening points where a standard anvil may not reach as easily.

This 40Vmax XGT impact wrench is designed for users who need torque, reach, and control in one cordless tool. Constant speed control helps maintain stable torque until the end of the battery charge for consistent fastening performance. Four forward modes and two reverse modes give crews better control over tightening and removal tasks, while the auto-stop functions in forward modes 1, 2, and 3 help improve bolt and nut tightening efficiency during tire service and similar work. Twin LED job lights, a full-speed mode to reduce trigger effort, and XPT protection against dust, dirt, debris, and water make this tool a practical choice for field service, fleet maintenance, and demanding outdoor jobsite conditions.

Makita 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench At a Glance

• 1,110 ft-lbs Maximum Torque: Built for heavy fastening applications on trucks, equipment, and structural work.
• 1,400 ft-lbs Nut-Busting Torque: Delivers strong reverse torque for loosening stubborn fasteners.
• 5-7/16″ Long Anvil: Reaches recessed bolts and nuts more easily than standard anvil designs.
• 3/4″ Square Drive: Sized for heavy-duty sockets used in fleet, equipment, and industrial service.
• 40Vmax XGT Platform: Cordless power for demanding work without a corded setup.
• 4 Forward / 2 Reverse Modes: Gives users more control for installation and removal tasks.
• Constant Speed Control: Helps maintain stable torque through the battery cycle.
• XPT Protection: Designed for work in dusty, dirty, and wet conditions.

Markets

• Truck and Fleet Maintenance: Used for wheel service, suspension work, and heavy fastener removal on commercial trucks.
• Heavy Equipment Repair: Practical for servicing loaders, excavators, trailers, and agricultural machinery.
• Construction and Steel Erection: Useful for tightening and loosening large bolts in structural and field applications.
• Industrial Maintenance: Helps maintenance crews service machinery, production equipment, and plant hardware.
• Municipal Workers: Suitable for public works fleets, utility vehicles, and equipment repair departments.
• Tire Service Operations: Designed for tire removal and installation on larger commercial vehicles.
• Trade Schools and Training Programs: Supports instruction in high torque fastening, fleet service, and equipment maintenance.

Truck service technicians and heavy equipment mechanics benefit from a cordless impact wrench that combines high torque with extended reach. The Makita TW011GZ is especially useful where recessed lug nuts or deep-set fasteners make access difficult. Its long anvil design helps crews work more efficiently on truck wheels and similar service points, while the high torque output provides the force needed for stubborn or heavily torqued fasteners.

Fleet departments, municipal service shops, and industrial maintenance teams also benefit from the tool’s operating modes and control features. The forward auto-stop settings help support more controlled tightening during installation work, while reverse modes improve removal control. For professionals working in outdoor yards, service bays, and field conditions, this cordless impact wrench gives users a strong combination of reach, power, and practical jobsite durability.

Makita TW011GZ 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench, Tool Only Features

• Makita Brushless Motor: Delivers high torque output with less heat and longer motor life.
• 1,400 ft-lbs Nut-Busting Torque: Provides strong reverse force for loosening stuck fasteners.
• 1,110 ft-lbs Maximum Fastening Torque: Built for demanding installation and tightening work.
• 5-7/16″ Long Anvil: Reaches recessed bolts and nuts in truck and equipment applications.
• 4 Forward Modes: Allows users to match output to the fastening job.
• 2 Reverse Modes: Supports better control during fastener removal.
• Auto-Stop Tightening Modes: Forward modes 1, 2, and 3 help improve bolt and nut tightening efficiency.
• Full-Speed Mode: Reduces trigger pull needed to reach full speed and helps reduce finger fatigue.
• Twin LED Job Lights: Lights above the trigger and above the battery improve visibility at the work area.
• Constant Speed Control: Helps maintain steady torque until the battery charge is depleted.
• XPT Protection: Designed to help resist water, dust, dirt, and debris in demanding conditions.
• Rubberized Soft Grip Handle: Improves comfort and control during longer work periods.

Makita TW011GZ 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench, Tool Only Includes

• (1) TW011GZ 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench
• (1) Hook (346949-3)

Makita TW011GZ 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench, Tool Only Specifications

• Brand: Makita
• Model: TW011GZ
• Product Type: Cordless High Torque Impact Wrench
• Battery Platform: 40Vmax XGT
• Drive Size: 3/4″ (19.1 mm)
• Anvil Length: 5-7/16″
• Motor Type: Brushless
• No Load Speed: 0-500 / 0-700 / 0-1,110 / 0-1,800 RPM
• Impacts Per Minute: 0-1,200 / 0-1,400 / 0-2,000 / 0-2,600 IPM
• Maximum Fastening Torque: 1,110 ft-lbs (1,500 Nm)
• Nut-Busting Torque: 1,400 ft-lbs (1,900 Nm)
• Forward Modes: (4)
• Reverse Modes: (2)
• Vibration Level: 15.6 m/s²
• Noise Level: 104 dB(A)
• Tool Length: 13″
• Tool Width: 3-11/16″
• Tool Height: 9-3/4″
• Net Weight: 8.0 lbs (3.6 kg)
• Shipping Length: 15.1″
• Shipping Width: 4.8″
• Shipping Height: 11.3″
• Shipping Weight: 10.19 lbs
• Battery Included: No
• Charger Included: No
• UPC Code: 197050010742
• MFG Part #: TW011GZ
• Warranty: Makita’s 3-Year Limited Warranty

Makita TW011GZ 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench, Tool Only Warranty

• Makita’s 3 Year Limited Warranty

Why Customers Choose The Makita 40Vmax XGT Brushless 3/4″ Long Anvil High Torque Impact Wrench

Fleet technicians, mechanics, and service crews choose the Makita TW011GZ because it gives them a cordless impact wrench with the torque needed for commercial truck wheels, heavy equipment fasteners, and other large bolted connections. The 3/4″ drive and 5-7/16″ long anvil make it especially useful for recessed lug nuts and deep-access service points where standard impact wrenches can be less practical. With high nut-busting torque and stable fastening output, crews can handle removal and installation work with fewer compromises between reach and power.

Users also choose this 40V impact wrench because the control features translate directly to real job results. The multi-mode settings help technicians match speed and impact force to the task, while auto-stop modes support more controlled tightening during wheel and equipment service. Twin LED lights, full-speed mode, and XPT protection make it a practical cordless impact wrench for daily work in service trucks, maintenance shops, outdoor yards, and industrial repair environments.