Makita DHP490Z 18V LXT Brushless 1/2″ Hammer Drill-Driver – Tool Only

The Makita DHP490Z 18V LXT Brushless 1/2″ Hammer Drill-Driver is designed for tradespeople and serious DIY users who need a compact cordless drill that still delivers strong torque and reliable hammer action. Running on Makita’s 18V LXT lithium-ion platform, this hammer drill-driver delivers up to 580 in. lbs (65 Nm) of maximum torque with a brushless motor that runs cooler and more efficiently than brushed designs. With a mechanical 2-speed gearbox (0–500 RPM Low, 0–1,900 RPM High) and up to 28,500 blows per minute in hammer mode, it handles drilling in wood, steel, and masonry with confidence.

At just 6-3/4″ (172 mm) long and 3.1–3.7 lbs (1.4–1.7 kg) bare tool, the DHP490Z is easy to control in tight spaces, overhead work, and all-day use. Three operating modes—drilling, hammer drilling, and screwdriving—combined with a 20-stage torque clutch give users precise control over fastening and drilling tasks. An LED work light, 1/2″ keyless chuck, and ergonomic grip make this 18V cordless hammer drill practical on framing jobs, service calls, or shop work. eXtreme Protection Technology (XPT) and an internal battery protection circuit help the tool stand up to dust, debris, and demanding conditions when paired with Makita 18V LXT batteries (sold separately).

Makita 18V LXT Brushless 1/2″ Hammer Drill-Driver At a Glance

• 18V LXT Brushless Motor: Delivers up to 580 in. lbs (65 Nm) of torque for demanding drilling and driving tasks.
• 3-in-1 Operation: Drilling, hammer drilling, and screwdriving modes cover most common jobsite applications.
• Mechanical 2-Speed Gearbox: Choose 0–500 RPM for higher torque or 0–1,900 RPM for faster drilling.
• High-Impact Hammer Action: Up to 28,500 BPM in high speed for efficient drilling in masonry and concrete block.
• Compact, Lightweight Design: Only 6-3/4″ long and 3.1–3.7 lbs for easier overhead and tight-space work.
• 20-Stage Torque Settings: Fine clutch adjustment helps prevent stripped fasteners and over-driving screws.
• LED Work Light: Single LED with pre-glow and after-glow to illuminate darker work areas.
• XPT Protection & Battery Safety: eXtreme Protection Technology and a battery protection circuit help protect against dust, moisture, overload, over-discharge, and over-heating.

Markets

• Construction and Renovation: Ideal as a primary 18V hammer drill for framing, drywall, light concrete drilling, and general interior work.
• Electrical and Plumbing Trades: Useful for drilling wood and steel studs, anchors, and fastener installation where a compact 1/2″ drill driver is needed.
• HVAC and Mechanical Contractors: Handles ducting fasteners, brackets, and light anchor holes in block or brick using hammer drill mode.
• Automotive and Fleet Maintenance: Suitable for drilling brackets, mounting hardware, and general repair work where a cordless drill is preferred.
• Facility Maintenance and Municipal Services: Reliable 18V hammer drill for day-to-day repairs, installations, and small projects across large sites.
• Trade Schools and Apprenticeship Programs: Demonstrates proper use of a modern 18V brushless hammer drill-driver for students learning drilling and fastening techniques.
• Homeowners and Serious DIY Users: A versatile cordless drill for home projects, renovations, and shop work when paired with existing Makita 18V LXT batteries.

Trades, maintenance teams, and advanced DIY users benefit from the DHP490Z’s balance of power and size. On renovation jobs, the cordless hammer drill function handles tapcon holes in block while the standard drill mode covers wood and steel. Electricians and plumbers can move from drilling stud holes to driving screws without changing tools, adjusting the 20-stage clutch as they go. In municipal or facility maintenance, staff appreciate having a single compact 18V drill driver that fits in service carts and tool bags yet still provides hammer drilling when needed. For homeowners already invested in the Makita 18V LXT platform, this tool-only hammer drill is a practical way to add masonry drilling without purchasing another battery kit.

Makita DHP490Z 18V LXT Brushless 1/2″ Hammer Drill-Driver – Tool Only Features

• Brushless Motor Technology: Increases efficiency, extends runtime per charge, and reduces maintenance compared to brushed motors.
• 18V LXT System Compatibility: Uses Makita 18V LXT lithium-ion batteries (sold separately) for platform-wide compatibility with other tools.
• Compact and Lightweight Body: 6-3/4″ overall length and 3.1–3.7 lbs net weight for better balance and control in tight or overhead applications.
• Variable 2-Speed, Reversible: Mechanical 2-speed gearing with forward and reverse lets users match speed and torque to the task.
• High No-Load Speed: Up to 1,900 RPM in high gear for fast drilling in wood and metal.
• Strong Hammer Mechanism: Up to 7,500 BPM in low and 28,500 BPM in high for effective drilling in masonry.
• 20-Stage Torque Adjustment: Torque clutch offers fine control to protect fasteners and materials during screwdriving.
• Three Operation Modes: Simple selection between drilling, hammer drilling, and screwdriving for versatility on the job.
• LED Work Light with Pre/After-Glow: Illuminates the work surface before and after trigger activation to aid alignment and bit positioning.
• 1/2″ Keyless Chuck: Allows quick bit changes without additional tools, supporting a wide range of drill and driver bits.
• Ergonomic Grip Design: Contoured handle promotes a secure, comfortable grip for better control.
• Convenient Reversing Switch: Easy-access switch for quick direction change during fastening and bit removal.
• eXtreme Protection Technology (XPT): Adds protection against dust, debris, and moisture for improved performance in harsh conditions.
• Integrated Hook: Provides a handy way to hang the drill on belts, ladders, or rails when not in use.
• Battery Protection Circuit: Helps guard against overloading, over-discharging, and over-heating to protect both the tool and battery.

Makita DHP490Z 18V LXT Brushless 1/2″ Hammer Drill-Driver – Tool Only Includes

• (1) Makita DHP490Z 18V LXT Brushless 1/2″ Hammer Drill-Driver (Tool Only)
• (1) 1/2″ Keyless Drill Chuck (763260-2)
• Batteries and charger sold separately.

Makita DHP490Z 18V LXT Brushless 1/2″ Hammer Drill-Driver – Tool Only Specifications

• MFG Part Number: DHP490Z
• UPC: 197050010247
• Voltage / Platform: 18V Li-Ion, Makita LXT
• Tool Type: Cordless hammer drill-driver (tool only)
• Chuck Size: 1/2″ (13 mm) keyless
• Drilling Capacity – Masonry: 1/2″ (13 mm)
• Drilling Capacity – Steel: 1/2″ (13 mm)
• Drilling Capacity – Wood: 1-1/2″ (38 mm)
• No-Load Speed – Low: 0–500 RPM
• No-Load Speed – High: 0–1,900 RPM
• Blows Per Minute – Low: 0–7,500 BPM
• Blows Per Minute – High: 0–28,500 BPM
• Maximum Torque: 580 in. lbs (65 Nm)
• Torque Settings: (20) clutch stages plus drill mode
• Speed Gears: (2) mechanical speeds
• Vibration Level: 8.1 m/s²
• Noise Level: 88 dB(A)
• Overall Length: 6-3/4″ (172 mm)
• Net Weight (Without Battery): 3.1–3.7 lbs (1.4–1.7 kg)
• Shipping Dimensions (L x W x H): 7.4″ x 3.9″ x 9.1″
• Shipping Weight: 5.75 lbs

Makita DHP490Z 18V LXT Brushless 1/2″ Hammer Drill-Driver – Tool Only Warranty

• Makita’s 3 Year Limited Warranty

Why Professionals Choose the Makita 18V LXT Brushless 1/2″ Hammer Drill-Driver

Installers and service technicians choose the Makita DHP490Z when they want one cordless hammer drill that can cover most of their daily work without adding bulk to the tool bag. The brushless 18V motor provides reliable torque for lag screws, structural screws, and general drilling, while the hammer mode lets crews drill smaller anchor holes in masonry without carrying a separate corded hammer drill. For users already running an 18V LXT drill or impact driver, this tool-only option fits into existing kits and chargers.

On renovation and maintenance jobs, the compact 1/2″ drill driver body makes it easier to work between studs, under sinks, or on ladders where space is limited. The combination of a 20-stage clutch, 2-speed gearbox, and LED light helps crews work more accurately with fewer stripped screws and less rework. As part of an 18V cordless drill lineup, the DHP490Z gives trades and advanced DIY users a practical hammer drill-driver that balances power, control, and portability on a familiar battery platform.