Milwaukee 2470-20 M12 12 Volt Lithium-Ion Cordless PVC Shear – Tool Only

The Milwaukee 2470-20 M12™ Plastic Pipe Shear is a 12V cordless PVC and plastic pipe cutter designed for fast, burr-free cuts on installed or loose pipe. It cuts up to 2 in. Schedule 80 PVC in 3 seconds or less, delivers over 200 cuts per charge with an M12™ REDLITHIUM™ battery, and includes a tool-only configuration for users already on the Milwaukee M12 platform.

The Milwaukee 2470-20 M12™ Plastic Pipe Shear is built for plumbers, mechanical contractors, maintenance teams, and remodelers who need a faster way to cut plastic pipe and tubing on the job. Milwaukee rates this cordless shear for cuts up to 2 in. Schedule 80 PVC, with a patented shear mechanism that can complete that cut in 3 seconds or less. The razor-sharp pierce-point blade is designed to leave clean, burr-free cuts on PVC, CPVC, PEX tubing, BlazeMaster®, ABS, non-metallic conduit, rubber hose, and similar materials.

Its offset blade helps you work closer to walls and mounted pipe than traditional manual shears, while the quick blade return improves speed on repetitive cuts. Milwaukee also specifies a 3 mm stainless steel blade, aluminum jaw, variable speed trigger, and on-board fuel gauge to support controlled cutting and better jobsite productivity. This is the bare tool only, so batteries and charger are sold separately.

Milwaukee M12 Lithium-Ion Cordless PVC Shear At a Glance

• Cuts Up to 2 in. Schedule 80 PVC: Designed for larger plastic pipe cutting capacity than many manual shears.
• Fast Cutting Performance: Milwaukee states it can cut through 2 in. Schedule 80 PVC in 3 seconds or less.
• Burr-Free Results: Razor-sharp pierce-point blade helps leave pipe ready for installation.
• Offset Blade Design: Makes it easier to cut installed pipe near studs or walls.
• Quick Blade Return: Helps improve efficiency on repetitive cutting work.
• Over 200 Cuts per Charge: When used with an M12™ REDLITHIUM™ battery pack.
• Durable Cutting Assembly: Stainless steel blade and aluminum jaw resist impact, water, and rust.
• Tool-Only Configuration: Includes the shear only; battery and charger are not included.

Quick Specs

• Brand: Milwaukee
• Manufacturer Part Number: 2470-20
• UPC: 045242203482
• Power Source: Cordless
• Voltage: 12V
• Battery Platform: M12™ REDLITHIUM™ lithium-ion
• Cutting Capacity: Up to 2 in. Schedule 80 PVC
• Cut Speed: 2 in. Schedule 80 PVC in 3 seconds or less
• Run Time: Over 200 cuts per charge
• Operating Control: Variable speed trigger

Markets

• Plumbing Contractors: Fast cutting for PVC, CPVC, PEX tubing, and related plastic piping work.
• Mechanical Contractors: Useful for repetitive installation and retrofit work on non-metallic pipe and tubing.
• Facility Maintenance: Good fit for repair teams handling routine pipe replacement and service work.
• Remodeling Crews: Helps cut pipe cleanly in tight spaces near framing or finished surfaces.
• Municipal and Institutional Maintenance: Practical for schools, hospitals, and public facilities using plastic piping systems.
• Advanced DIY Users: Suitable for users already invested in the Milwaukee M12 battery platform.

For buyers who want a faster and cleaner alternative to manual plastic pipe shears, the Milwaukee 2470-20 offers a practical cordless solution. It is designed to speed up repetitive cutting tasks, reduce cleanup from burrs or shavings, and make it easier to work on installed pipe where access is limited. The offset blade and quick blade return are especially useful on remodel and service calls where time and working room matter.

This model also fits well for contractors and maintenance departments already using Milwaukee M12 batteries. Since it is sold as a bare tool, it can be added to an existing M12 setup without paying for an extra charger or battery. Compared with the pasted feature list, the main correction is cutting capacity: Milwaukee currently specifies up to 2 in. Schedule 80 PVC, not just 2 in. Schedule 40 PVC.

Milwaukee 2470-20 M12 12 Volt Lithium-Ion Cordless PVC Shear – Tool Only Features

• Patented Shear Mechanism: Allows cuts up to 2 in. Schedule 80 PVC.
• Quick Blade Return: Helps increase productivity during repetitive cutting.
• Razor-Sharp Pierce-Point Blade: Delivers burr-free cuts on multiple plastic pipe and tubing materials.
• Over 200 Cuts per Charge: Designed for solid run time with an M12™ REDLITHIUM™ battery pack.
• Stainless Steel Blade and Aluminum Jaw: Resist impact, water, and rust on the job.
• Offset Blade: Optimized for cutting installed pipe closer than traditional shears.
• Variable Speed Trigger: Gives better control in warm and cold weather.
• On-Board Fuel Gauge: Lets the user monitor battery charge status during use.

Compatible Accessories / Works Well With

• Milwaukee M12™ REDLITHIUM™ battery packs, sold separately. Milwaukee confirms compatibility with M12 lithium-ion batteries.
• Milwaukee M12 chargers, sold separately, for users building out or expanding an M12 cordless setup.

Milwaukee 2470-20 M12 12 Volt Lithium-Ion Cordless PVC Shear – Tool Only Includes

• (1) M12™ Cordless Plastic Pipe Shear (2470-20)

Milwaukee 2470-20 M12 12 Volt Lithium-Ion Cordless PVC Shear – Tool Only Specifications

• Brand: Milwaukee
• Manufacturer Part Number: 2470-20
• UPC: 045242203482
• Product Type: Cordless plastic pipe shear / PVC shear
• Product Line: M12™
• Power Source: Cordless
• Voltage: 12V
• Battery Platform: M12™ REDLITHIUM™ lithium-ion
• Maximum Pipe Capacity: Up to 2 in. Schedule 80 PVC
• Cut Speed: 2 in. Schedule 80 PVC in 3 seconds or less
• Run Time: Over 200 cuts per charge
• Blade Material: 3 mm stainless steel
• Jaw Material: Aluminum
• Blade Style: Razor-sharp pierce-point, offset blade, quick return
• Supported Materials: PVC, CPVC, PEX tubing, BlazeMaster®, ABS, non-metallic conduit, rubber hose, and more
• Speed Control: Variable speed trigger
• Battery Included: No
• Charger Included: No
• Case Included: No

Milwaukee 2470-20 M12 12 Volt Lithium-Ion Cordless PVC Shear – Tool Only Warranty

• Milwaukee’s 5 Year Limited Tool Warranty

Why Customers Choose the Milwaukee M12 Lithium-Ion Cordless PVC Shear

Buyers choose the Milwaukee 2470-20 because it solves a common jobsite problem: cutting plastic pipe quickly without the fatigue and inconsistency of manual shears. The cordless design, burr-free cutting action, and offset blade make it useful for service calls, repetitive install work, and cuts made close to studs or walls. For crews working with PVC, CPVC, or PEX tubing, it offers a clean and repeatable way to keep work moving.

It also fits well into existing Milwaukee M12 setups. Contractors and maintenance teams can use their current M12 batteries and add this PVC shear as a task-specific cutting tool rather than buying into a separate platform. The verified product details also support a stronger listing than the pasted draft, especially by correcting the capacity to 2 in. Schedule 80 PVC.