LockNFlate LNL65107 15-1/2″ Straight Locking Dual Wheel Air Chuck

The LockNFlate LNL65107 is a straight-head, locking dual-wheel air chuck built to make inner tire service faster, safer, and more consistent. A two-jaw locking mechanism grips the Schrader valve stem securely so you can stand back while the tire inflates—no holding a push-on head in a hot wheel opening and no hissing leaks that throw off your readings. The patented remote actuator sits by the handle, not at the wheel, letting you release the jaws from outside the dual set. Pull the blue collar back to release the front jaws; push it forward to release the rear jaws. That tool-side control saves time on each wheel position and reduces the risk of burns or pinched fingers.

At 15.5 in. overall, the LNL65107 gives you the reach to access deep hand holes on semis, buses, and heavy trailers. The fixed, straight head is compact for tight openings, while the blue silicone grip provides a steady hold with gloves. Rated to 150 PSI, this dual-wheel chuck is ready for daily use in tire shops, fleet garages, and roadside service where accuracy and repeatable hookups matter.

LockNFlate 15-1/2″ Straight Locking Dual Wheel Air Chuck At a Glance

• Locking two-jaw head: Hands-free, leak-free inflation on Schrader valve stems.
• Remote actuator release: Disconnect from outside the dual—no reaching between tires.
• Straight, fixed head: Slim profile for tight hand holes and recessed stems.
• Extended reach (15.5″): Access inner duals on semis and heavy trucks with control.
• Blue silicone grip: Heat-resistant, non-slip handle for confident positioning.
• 150 PSI rating: Suited to garage and industrial airline systems.
• Clear use cues: Pull collar to release front jaws; push to release rear jaws.

Markets

• Tire Shops & Service Bays Quicker hookups and clean releases on commercial duals.
• Fleet & Truck Maintenance Consistent, repeatable inflation across tractors and trailers.
• Bus & Transit Efficient pressure checks on inner wheels without removing covers.
• Emergency & Roadside Service Safe stand-back operation when time and access are limited.
• RV & Motorcoach Reliable access to recessed stems on dual and tag axles.
• Municipal & Public Works Standard tool for mixed heavy-vehicle fleets.

Technicians working around dual wheels need three things: reach, a secure connection, and a way to release the chuck without digging back into the hand hole. The LNL65107 delivers all three. The long shaft and straight, compact head put the chuck square to the valve; the locking jaws hold pressure steady so the inflator gauge reads accurately; and the actuator collar at the handle frees the chuck instantly when you’re finished. Over a full tire round on a tractor-trailer or motorcoach, that sequence saves minutes per axle and reduces rework caused by under-inflated inner tires that were hard to reach. It’s a straightforward upgrade that improves safety, speed, and consistency for every dual-wheel service.

LockNFlate LNL65107 15-1/2″ Straight Locking Dual Wheel Air Chuck Features

• Two-Jaw Locking Design: Maintains a tight seal on Schrader stems for stable readings.
• Patented Remote Actuator: Tool-side collar releases front or rear jaws on demand.
• Straight, Fixed Head Geometry: Low-profile access for tight, straight-on approaches.
• Extended Steel Shaft: Rigid reach through deep wheel openings.
• Blue Silicone Grip: Comfortable, heat-resistant, and easy to control with gloves.
• Professional Duty: Built for frequent connect/disconnect cycles in commercial service

LockNFlate LNL65107 15-1/2″ Straight Locking Dual Wheel Air Chuck Includes

• (1) LNL65107 Straight Locking Dual Wheel Air Chuck

LockNFlate LNL65107 15-1/2″ Straight Locking Dual Wheel Air Chuck Specifications

• Model: LNL65107
• Overall Length (A): 15.5 in (400 mm)
• Head Length (B): 3.64 in (92.5 mm)
• Head Diameter (C): 0.88 in (22.4 mm)
• Head Height (D): 1.32 in (33.5 mm)
• Shaft Length (E): 8.25 in (209.5 mm)
• Actuator Diameter (F): 1.57 in (39.9 mm)
• Grip Length (G): 4.27 in (108.5 mm)
• Valve Type: Schrader
• Maximum Operating Pressure: 150 PSI (10.3 bar)
• Head Style: Straight, fixed
• Release Method: Remote actuator collar (pull = front, push = rear)

Why Professionals Choose the LockNFlate 15-1/2″ Straight Locking Dual Wheel Air Chuck

Crews choose the LNL65107 because it removes the pain points of inner-dual inflation. The locking head stops leaks and blow-offs, so a tire inflator gauge can settle on a stable reading. The remote actuator lets the tech disconnect from the safe side of the wheel without reaching past hot sidewalls. The long shaft and straight, compact head reach stems hidden behind deep hand holes, making pressure checks and top-offs predictable across the fleet. For shops and mobile services that want faster rounds and cleaner results on semis, buses, and RVs, this locking dual-wheel air chuck is a dependable, everyday tool.