KING INDUSTRIAL KC-227-2 10″ x 18″ Metal Cutting Bandsaw 220V

The KING INDUSTRIAL KC-227-2 is a heavy-duty 10″ x 18″ metal cutting bandsaw built for accurate, repeatable cuts in steel, aluminum, and other alloys. A 2 HP, 220V, 1-phase motor drives a 4-speed belt system (114, 196, 288, 377 FPM) to match blade speed to material and section thickness. Carbide ball-bearing blade guides stabilize a 1″ wide blade (122″ x 1″ x 0.032″) for straight tracking and long life, while a hydraulic down-feed lets operators fine-tune feed rate for smooth finishes and reduced blade wear. A quick-positioning TRU-LOCK™ vise secures work from 0° to 45° for angle cutting without fuss.

For uptime and cut quality, the machine uses a 24-volt centralized control panel with automatic shut-off at the end of a cut. The integrated coolant system, with regulator valves, delivers an even flow to the blade to keep temperatures controlled and chips flushed. With a 23″ table height and a rigid frame (70″ L x 27″ W x 42″ H, 634 lb), this saw is designed for shop reliability, precise results, and safer operation on production or maintenance work.

KING INDUSTRIAL 10″ x 18″ Metal Cutting Bandsaw At a Glance

• 2 HP, 220V Drive: Reliable power for continuous metal cutting.
• Four Blade Speeds: 114–377 FPM for matching speed to material.
• Hydraulic Down-Feed: Controlled descent for smooth surfaces and longer blade life.
• TRU-LOCK™ Quick Vise: Fast workholding from 0° to 45° for straight or miter cuts.
• Carbide Blade Guides: Stable tracking and accurate cuts on solid or tube stock.
• 24V Controls & Auto Shut-Off: Safer low-voltage controls with end-of-cut stop.
• Coolant System with Regulators: Even flow to blade improves finish and tool life.
• Adjustable Control Arms: Position guides close to the cut for maximum accuracy.

Markets

• Fabrication and Welding Shops: Daily cutting of tube, angle, channel, and solids for fit-up.
• Maintenance & Repair (MRO): Reliable shop saw for brackets, shafts, and machine repairs.
• Production Manufacturing: Consistent, repeatable cuts for batch work and fixtures.
• Automotive & Off-Road: Cutting roll-cage tubing, brackets, and driveline components.
• Municipal & Facility Maintenance: Shop-floor cutting with safe, low-voltage controls.
• Trade Schools & Training Centers: Teaches proper feed, speed, and coolant use.
• Steel Service & Warehousing: Break-down of stock to length with quick fixturing.

Professionals in fabrication and maintenance value this metal cutting bandsaw for its combination of capacity, control, and safety. The hydraulic down-feed and four selectable speeds allow operators to tune the cut for structural steel, stainless, or aluminum without swapping machines. The TRU-LOCK™ vise speeds setup on repetitive parts, while the 24-volt controls and automatic shut-off support safer operation during long runs. With carbide blade guides and an adjustable guide arm, the saw holds line through heavy sections, helping shops reduce rework and keep finishes consistent. For schools and municipal shops, the clear controls and coolant system make it a practical teaching and day-to-day production tool.

KING INDUSTRIAL KC-227-2 10″ x 18″ Metal Cutting Bandsaw 220V Includes

• (1) Saw assembly with base/frame
• (1) TRU-LOCK™ quick-positioning vise (0°–45°)
• (1) Hydraulic down-feed system
• (1) Coolant system with regulator valves
• (1) Centralized 24V control panel with auto shut-off
• (1) Set of carbide ball-bearing blade guides
• (1) Owner’s manual

KING INDUSTRIAL KC-227-2 10″ x 18″ Metal Cutting Bandsaw 220V Features

• Powerful 2 HP Motor
• Carbide ball bearing blade guides
• Centralized control panel and automatic shut-off
• Adjustable hydraulic down feed control
• TRU-LOCK™ cam lock and quick positioning vise system with fully adjustable jaws for 0˚ to • 45˚ angled cuts
• To ensure reliable accurate cuts, both adjustable control arms can be positioned as close to the cut as possible
• Exclusive 24 Volt control panel
• Coolant system with regulator valves provide an even flow of coolant to the blade
• Line Interruption

KING INDUSTRIAL KC-227-2 10″ x 18″ Metal Cutting Bandsaw 220V Specifications

• Model: KC-227-2
• UPC: 772995007257
• Cutting Capacity @ 90°: Rect. 10″ x 18″ • Diam. 10″
• Cutting Capacity @ 45°: Rect. 7″ x 9-3/8″ • Diam. 10″
• Blade Speeds: (4) 114, 196, 288, 377 FPM
• Blade Size: 122″ x 1″ x 0.032″
• Motor: 2 HP
• Current: 11.5 Amp
• Voltage: 220V, 1-phase, 60 Hz
• Table Height from Floor: 23″
• Assembled Size (L x W x H): 70″ x 27″ x 42″
• Assembled Weight: 634 lb
• Packaging Size (L x W x H): 67-1/2″ x 29-1/4″ x 43-1/2″
• Shipping Weight: 775 lb

KING INDUSTRIAL KC-227-2 10″ x 18″ Metal Cutting Bandsaw 220V Warranty

• King’s 2-Year Limited Warranty.

Why Professionals Choose the KING INDUSTRIAL 10″ x 18″ Metal Cutting Bandsaw 220V

Shops pick the KC-227-2 because it balances cut capacity with control features that matter on real jobs. The hydraulic down-feed and four-speed belt drive let crews dial in the cut on angle iron, tube, and solid bar without burning blades. The quick-positioning vise speeds up changeovers for 0° to 45° miters, and the adjustable guide arm keeps a 1″ blade on line for fewer touch-ups at the bench. With a dependable coolant system and low-voltage controls, this 220V metal cutting bandsaw supports safer, cleaner operation during long runs. For teams that need repeatable results and straightforward setup, it delivers consistent cuts and dependable performance shift after shift.