Jackson Safety 14756 Curv-O-Mark XXL 6″ – 16″ Pipe Wrap-A-Round

Jackson Safety 14756 Curv-O-Mark XXL 6″–16″ Pipe Wrap-A-Round Pipe Measuring Tool

The Jackson Safety 14756 XXL Curv-O-Mark Pipe Wrap-A-Round is a simple but precise pipe measuring tool designed for pipe fitters, welders, and fabricators who need clean, accurate layout lines on round pipe. Manufactured from a flexible gasket material, this black Wrap-A-Round resists both low and high temperatures in use, up to 350°F, so it holds its shape and markings even in tough shop or field conditions. At 5″ wide and 9 feet long, it easily wraps around larger pipe sizes and is sized specifically for marking pipes from 6″ to 16″ in diameter.

More than just a wrap tape, this pipe marking tool includes a printed inch scale, an inch chart, tangent chart, and reference marks that make it faster to lay out straight lines, angle cuts, and fittings. A printed diagram on the tool itself shows how to draw and construct an elbow, helping crews keep common layout steps consistent from job to job. Whether you’re preparing a weld, cutting saddles, or laying out fit-ups on structural pipe, the XXL Jackson Safety Wrap-A-Round helps keep layout work accurate, repeatable, and easy to read on site or in the shop.

Jackson Safety Black Curv-O-Mark 6″ – 16″ Pipe Wrap-A-Round At a Glance

• XXL Pipe Diameter Range: Designed for pipe from 6″ to 16″ in diameter for large-bore layout work.
• Flexible Gasket Material: Wraps tightly around pipe while resisting distortion in hot or cold environments.
• Heat Resistant to 350°F: Black material is rated for use up to 350°F for common welding and fabrication conditions.
• Printed Inch Scale and Charts: Includes inch scale, inch chart, tangent chart, and layout markings for fast reference.
• Elbow Layout Diagram: Printed instructions on the tool show how to draw and construct an elbow directly on the pipe.
• 5″ x 9′ Size: Offers generous length and width for stable wrapping, clear marking, and easier handling on bigger pipe.
• Made in the USA: Manufactured in the United States for consistent quality and traceability.
• Economical Layout Tool: Provides precise pipe marking at a lower cost than more complex measuring devices.

Markets

• Pipe Fitting and Welding Shops Used for marking straight lines, cut lines, and fittings on structural and process pipe.
• Industrial Fabrication and Maintenance Helps lay out repair cuts and tie-ins on boiler lines, process piping, and plant utilities.
• Construction and Mechanical Contractors Useful on commercial and industrial jobsites for layout on HVAC, fire protection, and plumbing runs.
• Oil, Gas, and Petrochemical Facilities Assists crews with consistent layout on high-volume pipe work in refineries and processing plants.
• Shipbuilding and Marine Repair Supports accurate pipe marking in tight, curved spaces where straight edges are hard to use.
• Municipal Utilities and Water Works Ideal for water, sewer, and treatment plant piping where repeatable layout is required.
• Trade Schools and Welding Programs Provides a clear, reusable teaching aid for pipe layout and measurement skills.

For these users, the Jackson Safety XXL pipe marking tool provides a dependable, repeatable way to mark straight lines and fittings on round pipe without struggling with rigid straight edges or improvised templates. Fabrication shops rely on the Wrap-A-Round pipe wrap around tape when they need to keep weld prep and cut lines consistent between different workers and shifts. Field crews benefit from a flexible pipe measuring tool that fits easily in a toolbox yet handles larger pipe diameters from 6″ to 16″. Training programs and trade schools value the printed charts and elbow diagram because they visually reinforce pipe layout techniques for students while still being rugged enough for daily classroom use. Across these markets, the tool helps reduce layout time, cut down on rework, and keep layout steps standardized from project to project.

Jackson Safety 14756 Black Curv-O-Mark XXL 6″ – 16″ Pipe Wrap-A-Round Features

• Flexible Gasket Construction: Made from a super flexible gasket material that conforms closely to pipe for accurate marking.
• Heat and Cold Resistant: Engineered to resist both low and high temperatures in use, rated to 350°F for the black material.
• Printed Inch Scale: Clear inch scale runs along the length of the wrap to support quick measurements and layout checks.
• Tangent and Inch Charts: Built-in inch chart and tangent chart provide reference data directly on the pipe marking tool.
• Straight Line and Edge Marking: Designed to mark straight lines around pipes or provide a straight edge before welding or cutting.
• Elbow Construction Diagram: Includes a printed diagram that walks users through drawing and constructing an elbow layout.
• XXL Format for Larger Pipe: Measures 5″ x 9′ to handle larger diameter pipe from 6″ to 16″ without coming up short.
• Economical Precision Tool: Provides accurate layout performance without the cost or complexity of digital or mechanical layout tools.

Jackson Safety 14756 Black Curv-O-Mark XXL 6″ – 16″ Pipe Wrap-A-Round Includes

• (1) Jackson Safety 14756 Black XXL 5″ x 9′ Pipe Wrap-A-Round Pipe Measuring Tool

Jackson Safety 14756 Black Curv-O-Mark XXL 6″ – 16″ Pipe Wrap-A-Round Specifications

• Brand: Jackson Safety
• Model / Part Number: 14756
• GTIN: 00024886074115
• Product Type: Pipe Measuring and Marking Tool (Wrap-A-Round)
• Color: Black
• Material: Flexible gasket material
• Size (Width x Length): 5″ x 9′
• Pipe Diameter Range: 6″ to 16″
• Maximum Temperature in Use: 350°F (black material)
• Markings: Inch scale, inch chart, tangent chart, elbow construction diagram
• Primary Use: Marking straight lines and edges on pipe prior to welding or cutting
• Country of Origin: United States

Why Metalworkers Choose the Jackson Safety Curv-O-Mark XXL 6″ – 16″ Pipe Wrap-A-Round

Pipe fitters and welders choose the Jackson Safety 14756 because it gives them a dependable pipe marking tool that works the same way every time, whether they are in the shop or on a jobsite. The flexible gasket material wraps tight around pipe, so lines stay straight and true instead of wandering like marks made off a loose tape measure. With the inch scale, inch chart, and tangent chart printed directly on the pipe wrap around, crews have their reference data where they need it—on the work, not in a notebook.

For larger lines between 6″ and 16″ in diameter, this pipe measuring tool provides enough length and width to stay stable while scribing cut lines, weld preps, or layout marks for elbows and fittings. Technicians appreciate the elbow construction diagram because it reinforces common layout steps without stopping to look up charts. The result is faster layout, fewer mistakes, and consistent marks from one section of pipe to the next.