BE Power Equipment AC658HB 13.8CFM 8Gallon Gas Air Compressor, Honda GX200

The BE Power Equipment AC658HB 13.8 CFM 8 Gallon Gas Air Compressor is built for contractors and service crews who need portable air power in locations where electrical supply is limited or unavailable. Designed with a commercial grade Honda GX200 engine, this gas air compressor delivers strong performance with an excellent weight-to-power ratio for daily use on jobsites, in service trucks, and on mobile work setups. Its belt drive system helps keep pump RPM lower and running temperatures cooler, which supports longer pump life and dependable output over extended work periods. With 13.8 CFM and a maximum pressure of 125 PSI, this compressor is a practical choice for framing, roofing, siding, finish work, repair work, and general pneumatic tool use.

This compressor is designed for durability and practical field use. The heavy-duty splash-lubricated reciprocating pump uses cast iron cylinders and an aluminum body to balance strength, cooling, and long service life. Twin 4-gallon tanks provide a combined 8-gallon capacity and are powder coated for added durability in demanding environments. Each tank includes a drain port, and the stabilizing brackets are pre-drilled for truck or trailer mounting. The integrated control panel is built into the frame for added protection, while the included regulator, dual air gauges, industrial couplers, and safety relief valve make the compressor ready for everyday jobsite use.

BE Power Equipment 13.8CFM 8Gallon Gas Air Compressor At a Glance

• 13.8 CFM Output: Provides strong airflow for many common pneumatic tools.
• 8 Gallon Twin Tank Design: Combines portability with practical stored air capacity.
• Honda GX200 Engine: Commercial grade gas engine built for dependable daily use.
• Belt Drive Pump System: Helps reduce pump RPM and operating temperature for longer life.
• 125 PSI Maximum Pressure: Suitable for a wide range of air tool applications.
• Cast Iron Cylinder Pump: Built for durability in demanding work conditions.
• Truck and Trailer Mount Ready: Pre-drilled stabilizing brackets support mobile mounting.
• Protected Integrated Control Panel: Helps shield controls during transport and jobsite use.

Markets

• Construction and Renovation: Used for nailers, staplers, and general pneumatic tool support on active jobsites.
• Roofing and Siding Crews: Practical for mobile air supply where electrical service is not available.
• Framing and Exterior Carpentry: Useful for powering pneumatic fastening tools on remote sites.
• Service Trucks and Mobile Repair: Suitable for field crews needing on-board compressed air.
• Agriculture and Farm Use: Helps operate air tools in barns, sheds, and remote work areas.
• Municipal Workers: Practical for maintenance departments using trailer- or truck-mounted compressors.
• Trade Schools and Training Programs: Supports instruction in pneumatic tool use and compressor operation.

Contractors and mobile crews benefit from a gas air compressor that can travel easily to the point of work and deliver reliable compressed air without depending on jobsite electricity. The BE AC658HB is especially useful for truck and trailer setups where a compressor may stay mounted and ready for repeated use throughout the day. Its Honda engine and belt drive pump make it a strong option for crews who rely on consistent air output and long-term durability.

Municipal departments, farm operators, and field repair teams also benefit from the twin tank design and protected control layout. The combination of portable air storage, stable frame construction, and mounting-ready brackets makes this unit practical for demanding work environments. For users who need a dependable gas-powered air compressor for daily jobsite or mobile service use, this model offers strong airflow and rugged construction.

BE Power Equipment AC658HB 13.8CFM 8Gallon Gas Air Compressor Features

• Commercial Grade Honda Engine: Designed for all-day, everyday use with dependable performance.
• Belt Drive System: Keeps pump RPM lower and running cooler to extend service life.
• Heavy-Duty Reciprocating Pump: Built for strong air delivery in demanding work conditions.
• Splash Lubricated Pump Design: Supports durability and consistent pump operation.
• Cast Iron Cylinders: Adds strength and long-term wear resistance.
• Aluminum Pump Body: Helps manage weight while supporting cooling and durability.
• USA Conrader Pilot Unloader Valve: Set to cut in at 95 PSI and cut out at 125 PSI.
• Twin Powder-Coated 4 Gallon Tanks: Provides 8 gallons total capacity with added corrosion resistance.
• Tank Drain Ports: Each tank includes a drain point for routine maintenance.
• Pre-Drilled Mounting Brackets: Supports installation into a truck or trailer.
• Integrated Control Panel: Built into the frame for added protection.
• Ready-to-Work Setup: Includes regulator, two air gauges, two industrial couplers, and safety relief valve.

BE Power Equipment AC658HB 13.8CFM 8Gallon Gas Air Compressor Includes

• (1) AC658HB 13.8 CFM 8 Gallon Gas Air Compressor
• (1) Regulator
• (2) Air Gauges
• (2) Industrial Type Couplers
• (1) Safety Relief Valve

BE Power Equipment AC658HB 13.8CFM 8Gallon Gas Air Compressor Specifications

• Brand: BE Power Equipment
• Model: AC658HB
• Product Type: Gas Air Compressor
• Engine Manufacturer: Honda
• Engine Model: GX200
• Engine Displacement: 196cc
• Fuel Type: 86 Octane, Up to 10% Ethanol
• Engine Oil Type: SAE 10W30
• Tank Capacity: 8 Gallons
• Tank Configuration: Twin 4 Gallon Tanks
• Frame Material: Powder-Coated Steel
• Tank Drain Type: Twist Valve
• Wheel Size: 10″
• Wheel Type: Flat Free
• Pump Type: Reciprocating
• Pump Part Number: 42.004.022
• Maximum Pressure: 125 PSI
• Air Delivery: 13.8 CFM
• Stage: Single
• Pump Oil Type: 30W Non-Detergent
• Duty Cycle: 80%
• Pump RPM: 1200
• Air Filter Port Size: 3/4″ NPT
• Air Filter Part Number: 42.004.028
• Product Length: 45″
• Product Width: 19″
• Product Height: 28″
• Product Weight: 150 lbs
• Shipping Length: 45″
• Shipping Width: 19″
• Shipping Height: 30″
• Shipping Weight: 175 lbs
• UPC: 777897165432

BE Power Equipment AC658HB 13.8CFM 8Gallon Gas Air Compressor Warranty

• BE Power Equipment’s Air Compressor 3 years standard warranty, with 5 years if the product is registered
• Honda’s Engine 3 year standard warranty

Why Customers Choose the BE Power Equipment 13.8CFM 8Gallon Gas Air Compressor

Contractors and mobile service crews choose the BE AC658HB because it gives them a gas-powered air compressor with the airflow needed for daily pneumatic tool use in areas where electrical power is not practical. The Honda GX200 engine provides dependable field performance, while the belt drive pump helps the unit run cooler and support longer pump life. For truck and trailer setups, the twin tank design and pre-drilled mounting brackets make this compressor especially useful for keeping air power ready at all times.

Users also choose this compressor because it is built with the kind of durability needed for repeated jobsite use. The cast iron cylinders, powder-coated tanks, protected control panel, and included couplers and gauges make it a practical choice for construction, farm work, municipal maintenance, and service applications. For users searching for a gas air compressor, Honda powered compressor, or truck-mount air compressor, this model offers a dependable combination of airflow, portability, and rugged construction.