SENCO DA25EGBR 2-1/2″ x 15 Ga 34° Angled Stainless Steel Finish Nails, 1,000 Box

SENCO DA25EGBR 2-1/2″ x 15 Gauge 34° Angled Stainless Steel Finish Nails (Sencote), 1,000 Box

The SENCO DA25EGBR is a 2-1/2″ long, 15-gauge, 34° angled DA-style finish nail designed for clean, secure fastening in trim, casing, baseboard, and cabinet work. Manufactured from 304 stainless steel with SENCO’s Sencote® lubrication, these nails drive smoothly and resist corrosion in damp or exterior locations. The brad head sits neatly below the surface for easy putty fill, while the chisel point reduces splitting in hardwoods and composites. Packed 1,000 per box, they’re jobsite-ready for crews who run 15-gauge, 34° angled finish nailers. Compatible SENCO tools include the F-15XP, FinishPro® 42XP, 30XP, and 35Mg.

With a 0.072″ wire diameter and smooth shank, these DA nails balance holding power with a refined finish—ideal for doors and window casings, crown and base, chair rail, and built-ins. Paper-tape collation keeps strips intact and feeding reliably, helping reduce jams and downtime on site. If you work in coastal regions, bathrooms, kitchens, or other moisture-prone areas, the 304 stainless build delivers the long-term durability you expect from a professional fastener. Key specs (model DA25EGBR, UPC 741474152788) match SENCO’s 15-gauge 34° platform for broad compatibility across DA-style nailers.

SENCO 2-1/2″ x 15 Ga 34° Angled Stainless Steel Finish Nails At a Glance

• 304 Stainless Steel: Corrosion resistance for exterior or humid environments.

• Sencote® Lubrication: Smoother driving and fewer misfires in dense trim stock.

• 15-Gauge, 0.072″ Wire: Strong hold with a small, clean brad head.

• 34° Paper-Tape Strip: Reliable feeding in DA-style angled finish nailers.

• Chisel Point: Helps prevent splitting in hardwoods and MDF.

• Smooth Shank: Drives easily and seats consistently for faster finishing.

• Trim & Millwork Ready: Ideal for casing, base, crown, chair rail, and cabinetry.

• 1,000-Count Box: Suited for punch-list work and small-to-mid projects

Markets

• Finish Carpentry & Renovation – Interior trim, casing, base, and crown in residential and light commercial work.

• Cabinetry & Millwork Shops – Assembly and installation of cabinets, built-ins, and face frames.

• Door & Window Installation – Secure jambs, stops, and casings with a discreet brad head.

• Property & Facility Maintenance – Quick repairs where a finished look and reliability are required.

• Marine/Coastal & Wet Areas – 304 stainless helps resist rust in bathrooms, kitchens, and seaside builds.

• Trade Schools & Training Programs – Demonstrates proper fastener selection for 15-ga angled finish nailers.

Professionals in finish carpentry will value the way a 15-gauge angled finish nail grips heavy casing and base without leaving a large head to hide. Cabinet installers can set these DA nails at tight angles, then fill minimal holes for a clean look. Maintenance teams get a dependable stainless fastener that stands up in damp spaces, reducing callbacks due to corrosion. For crews who already run DA-style 34° finish nailers, the Sencote coating keeps work moving with consistent drives and fewer jams—especially in hardwood trim and MDF.

SENCO DA25EGBR 2-1/2″ x 15 Ga 34° Angled Stainless Steel Finish Nails, 1,000 Box Features

• 304 Stainless Steel Construction: Durable, corrosion-resistant fastener for interior/exterior use.

• Sencote® Coating: Reduced driving friction for smoother seating.

• Brad Head Profile: Minimal surface disruption for easier finishing.

• Chisel Point: Helps start straight and limit wood splitting.

• 34° Paper-Tape Collation: DA-style compatibility and steady feed.

• Smooth Shank: Consistent penetration in hardwoods and composites.

SENCO DA25EGBR 2-1/2″ x 15 Ga 34° Angled Stainless Steel Finish Nails, 1,000 Box Includes

• (1,000) 2-1/2″ x 15-Gauge 34° Angled Stainless Steel Finish Nails (Sencote)

SENCO DA25EGBR 2-1/2″ x 15 Ga 34° Angled Stainless Steel Finish Nails, 1,000 Box Specifications

• Model: DA25EGBR

• Length: 2-1/2″ (63 mm)

• Gauge / Wire Ø: 15 ga / 0.072″

• Collation Angle / Type: 34° / paper-tape (angled glued)

• Material: 304 stainless steel

• Finish / Coating: Sencote®

• Head Type / Diameter: Brad / 0.072″

• Shank Type: Smooth

• Point Type: Chisel

• Box Count: (1,000)

• Compatible Tools: SENCO F-15XP (10L0001N), FinishPro® 42XP (4G0001N), FinishPro® 30XP (9P0002N), FinishPro® 35Mg (6G0001N)

• UPC: 741474152788

Why Professionals Choose the SENCO 2-1/2″ x 15 Ga 34° Angled Stainless Steel Finish Nails

Crews pick this 15-gauge, 34° angled finish nail when they need strong holding power with a clean, professional look. The DA-style profile fits common 15-gauge finish nailers and lets installers reach inside corners and tight reveals around doors and window casings. On trim and baseboard, the brad head keeps fill work quick while the Sencote coating helps each nail set flush. For built-ins, cabinets, and millwork in kitchens, baths, or coastal homes, the 304 stainless steel construction resists rust and staining over time. In short, these stainless 15-gauge angled finish nails deliver reliable grip, smooth driving, and a neat surface—job after job.