Milwaukee 2776-20 M18 FORCE LOGIC 3” Underground Cable Cutter – Tool Only

The Milwaukee 2776-20 M18™ FORCE LOGIC™ 3″ Underground Cable Cutter is designed for trench work where control, speed, and access determine shift productivity. A new-to-world open-jaw layout lets linemen scoop the cable into the head and keep a neutral, balanced stance while lining up the cut. Once aligned, a 9-ton hydraulic system powered by a POWERSTATE™ brushless motor drives rapid cycles through 15kV cable and up to 1500 MCM copper, making installation and wrecking cuts straightforward in tight vaults and excavations. The inline body and top-handle balance help operators set the tool precisely without fighting wrist torque or trench walls.

Reliability is built in with a fully enclosed high-speed hydraulic pump, REDLINK™ electronics, and REDLITHIUM™ battery compatibility (battery sold separately). ONE-KEY™ support adds fleet visibility, service reminders, and lockout for security. By bringing controlled, hose-free cutting directly to the trench, the 2776-20 reduces setup time, limits hot-work exposure, and keeps crews moving between pulls, splices, and removals.

Milwaukee M18 FORCE LOGIC 3” Underground Cable Cutter At a Glance

Scoop-In Open Jaw: Easier cable pick-up and alignment in trenches and vaults.
9-Ton Hydraulic Drive: Best-in-class cut speed on underground power conductors.
Capacity: 15kV cable; cuts up to 1500 MCM copper (application dependent).
Inline, Top-Handle Balance: Maintains control in confined spaces and awkward orientations.
Sealed High-Speed Hydraulics: Keeps dust and grit out for dependable operation.
POWERSTATE™ Brushless + REDLINK™: Consistent output and component protection.
ONE-KEY™ Enabled: Usage tracking, maintenance notifications, and remote lockout.
M18™ System: Runs on the same batteries as 200+ M18™ tools (battery sold separately).

Markets

Underground Utilities & T&D Safe, controlled cutting for pulls, wrecking, and sectioning.
Contract Line Crews Fast setup in trenches without generators, hoses, or hot-work.
Municipal & Co-Op Utilities Fleet-tracked tools for service work and planned outages.
Industrial Campuses & Transit/Rail Expansion and repair of medium-voltage distribution.
Renewable Energy (Solar/BESS/Wind) Collector and substation underground runs.
Trade Schools & Apprenticeships Teaching safe hydraulic cutting techniques in confined spaces.

Underground work demands a hydraulic cable cutter that aligns easily and cuts fast without extra fixtures. The 2776-20’s scoop-in jaw reduces fiddling at the cut line, while the top-handle keeps the tool balanced over the cable for smoother, straighter cuts. The 9-ton pump pushes through 15kV and 1500 MCM copper quickly, shortening time spent in the trench. A sealed hydraulic system and brushless motor maintain performance in mud, grit, and weather, and REDLINK protects the drive under load. With ONE-KEY, supervisors can schedule service and lock a missing tool, and crews on the M18 platform keep batteries common across their fleet. The result is controlled cutting, shorter setup, and fewer delays between tasks.

Milwaukee 2776-20 M18 FORCE LOGIC 3” Underground Cable Cutter – Tool Only Features

15kV cable
Cuts up to 1500MCM Copper
Fully enclosed high speed hydraulic pump, Brushless Motor, REDLINK™ Electronics and REDLITHIUM™ Battery combine to deliver ultimate reliability in the toughest conditions
In-line design delivers easiest access in trenches
Milwaukee® ONE KEY™ Technology allows Linemen to view tool usage, receive notifications for recommended maintenance, and sync information wirelessly to the cloud
Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life.
Powerful 9T hydraulic pump delivers best in class cut speed
REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
“The Milwaukee® REDLITHIUM™ Battery Pack (sold separately)
is the most durable pack on the market delivering more run-time, power and longer battery life.”
Top-handle layout provides balanced cut alignment
Part of the M18™ System, featuring over 200+ tools

Milwaukee 2776-20 M18 FORCE LOGIC 3” Underground Cable Cutter – Tool Only Includes

- (1) M18™ FORCE LOGIC™ 3″ Underground Cable Cutter (2776-20)
- (1) Carabineer
- (1) Inverter
- (1) Utility Bag
- Tool Only – Battery and charger sold separately

Milwaukee 2776-20 M18 FORCE LOGIC 3” Underground Cable Cutter – Tool Only Specifications

MFG Part #: 2776-20
UPC / GTIN: 045242549719 / 00045242549719
Battery System: M18™ (Lithium-Ion)
Power Source: Electric — Cordless
Motor Type: Brushless
Hydraulic Force: 9 Ton
Cutting Capacity: 15kV cable; up to 1500 MCM copper
Color / Finish: Black, Red
Tool Length: 23.8 in
Tool Width: 12.8 in
Tool Height: 10.3 in
Weight (Excluding Battery): 30.86 lb
Assembled Dimensions (L × W × H): 23.8 × 12.8 × 10.3 in
Package Dimensions (H × W × D): 10.27 × 12.67 × 23.50 in
Package Weight: 26.34 lb
Number of Batteries Included: (0) (Tool Only)
Number of Batteries Required: (1)
ONE-KEY™ Enabled: Yes
Warranty: 5-Year Limited Warranty (tool)

Milwaukee 2776-20 M18 FORCE LOGIC 3” Underground Cable Cutter – Tool Only Warranty

Milwaukee’s 5 Year Limited Warranty

Why Professionals Choose The Milwaukee M18 FORCE LOGIC 3” Underground Cable Cutter

Crews choose this underground cable cutter for its trench-friendly handling and fast cycle time on large conductors. The scoop-in, open-jaw design simplifies pickup and alignment so operators keep balance and cut accurately on the first try. The 9-ton hydraulic drive and brushless motor push through 15kV and 1500 MCM copper while REDLINK maintains consistent output under load. With a sealed pump for durability and ONE-KEY for tracking and maintenance, it fits utility fleets that require dependable, data-aware tools. As part of the M18 cordless system, it’s ready to work wherever the trench is—no hoses, no generators.

Milwaukee 2776-20 M18 FORCE LOGIC 3” Underground Cable Cutter – Tool Only Notes for Buyers (quick tips)

Cable Fit & Bracing: Use the scoop-in jaw to pick up the conductor and keep the tool centered over the cut; avoid twisting the head against trench walls.
Capacity Confirmation: For compacted / unusual strand profiles or jacketed builds, confirm OD and spec before cutting; follow utility procedures for 15kV cable.
Cut Planning: De-energize, bond, and ground per your standards. If sectioning, mark lengths and plan for neutral removal before phase cuts.
Cycle Control: Let the ram complete and fully retract before repositioning to prevent strand pull or lip formation.
Tool Support: Use the carabiner for tethering in vaults or on ladders; do not suspend by the battery.
Environment: Keep the jaw area free of slurry and grit; wipe after muddy cuts to protect seals and die faces.
Battery Choice: Any M18 pack will run the tool; HIGH OUTPUT™/FORGE™ packs provide better sustained performance on consecutive cuts.
Transport & Storage: Stow in the utility bag with the trigger protected; keep the inverter and electronics dry.