Milwaukee 2679-750AL M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw – Tool Only

The Milwaukee 2679-750AL M18™ FORCE LOGIC™ 600 MCM Aluminum Crimper with 750 MCM Expanded Jaw is built for commercial electrical terminations where accuracy, inspection, and throughput matter. Using Milwaukee® 6T U-Style dies with bold wire-size and industry color markings, this setup produces cULus Classified crimps per UL 486A-B on #8–750 MCM copper and on dual-rated color-coded lugs and splices from leading brands. The inline body and 340° rotating head make it easier to approach connectors inside crowded panels or gear. A proprietary jaw holds the connector for instant alignment, while the easy-open, latched design speeds repetitive work on larger aluminum conductors.

Predictive Force Monitoring (PFM™) controls output to reach and verify full pressure every cycle; the green LED gives instant confirmation before you move on. Fully enclosed high-speed hydraulics, a POWERSTATE™ brushless motor, and weather-protected electronics support consistent performance from 0°F to 122°F. ONE-KEY™ captures crimp data for professional report building. The jaw set is interchangeable with other FORCE LOGIC™ options so crews can swap between 600 MCM, 750 MCM crimping, and 750 MCM cutting jaws as work changes.

Milwaukee M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw At a Glance

cULus Classified Results: Meets UL 486A-B when used with Milwaukee U-Style dies on #8–750 MCM Cu and dual-rated connectors.
U-Style 6T Dies with Size Imprint: Clear wire-size and color markings; imprints size on the connector for easy inspection.
Proprietary Connector Hold: Stabilizes the lug or splice for faster, accurate alignment.
Inline Body + 340° Head: Easier access in tight switchgear and panels; better orientation on large Al conductors.
PFM™ + Green LED: Real-time force monitoring with cycle verification to ensure uniform crimps.
Fast 3-Second Cycles: High-speed, fully enclosed hydraulics support repetitive production work.
Jaw Interchangeability: Swap with 600 MCM and 750 MCM crimping jaws or 750 MCM cutting jaw as needed.
ONE-KEY™ Data Logging: Records and stores every crimp for QA and closeout documentation.

Markets

Commercial & Industrial Electrical Terminations on switchgear, MCCs, bus duct drops, and feeders.
Large-Scale Residential & High-Rise Service conductors and risers using dual-rated connectors.
Renewable Energy (Solar/BESS) Battery, combiner, and inverter terminations in aluminum and copper.
OEM & Panel Shops High-throughput crimping with inspection-friendly die markings.
Municipal & Facility Maintenance Campus utilities and expansions requiring documented connections.
Trade Schools & Apprenticeships Training on UL-classified crimping and inspection practices.

Contractors and panel shops need a crimping tool that aligns quickly, verifies pressure, and leaves a clear visual inspection. The 2679-750AL’s proprietary jaw holds the connector steady so the conductor seats correctly before the cycle starts. PFM™ removes guesswork by confirming full pressure, and the green LED signals a completed crimp—useful when closing out many terminations in a shift. The U-Style die system with wire-size imprint speeds inspections and punch-list sign-offs. With jaw interchangeability, crews can stay on the same M18™ platform while moving from 600 MCM to expanded 750 MCM work or switching to a cutting jaw, reducing tool changes and downtime.

Milwaukee 2679-750AL M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw – Tool Only Features

Easy-open Jaw for fastest repetitive crimping
PFM (Predictive Force Monitoring) ensures optimal pressure every time, LED light provides instant pressure verification
Hydraulic system is optimized for consistent performance from 0°F – 122°F
Proprietary jaw holds connector for instant alignment
In-line design and 350 degree head rotation: easy access in the tightest panels
Weather protected electronics keep dirt, dust and moisture out
Easily Interchangeable with 600 MCM Crimping Jaw (49-16-U000), 750 MCM Crimping Jaw (49-16-U111), and 750 MCM Cutting Jaw (49-16-2780)
Kit includes full set of #8-750 MCM Aluminum 6T U Style Dies
Tool records and stores every crimp made, ONE-KEY™ enabled for professional report building
Part of the M18™ System, featuring over 200+ tools

Milwaukee 2679-750AL M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw – Tool Only Includes

(1) M18™ 600 MCM Crimper
(1) 600/350 MCM Cu/Al Crimping Jaw
(1) 750 MCM Cu/Al Crimping Jaw
(16) Aluminum U-Style Dies, #8–750 MCM
(1) Carrying Case
(Battery and charger sold separately)

Milwaukee 2679-750AL M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw – Tool Only Specifications

MFG Part # (OEM): 2679-750AL
GTIN: 00045242524013
Power Source: Electric — Cordless (M18™)
Battery Voltage: 18V (Lithium-Ion)
Number of Batteries Included: (0)
Charger Included: No
Crimp Force: 6-Ton class with U-Style dies (per jaw/die specification)
Conductor/Connector Range: #8–750 MCM Cu and dual-rated lugs/splices (with included U-Style dies)
Crimp Speed: 3 seconds (typical)
Head Rotation: 340°
Operating Temperature: 0°F to 122°F
Tool Length: 13.25 in
Tool Width: 3.13 in
Tool Height: 4.63 in
Weight (Excluding Battery): 8.20 lb
Assembled Dimensions (L × W × H): 13.25 × 3.125 × 4.625 in
Package Dimensions (L × W × H): 25.19 × 6.65 × 19.44 in
Package Weight: 26.74 lb

Milwaukee 2679-750AL M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw – Tool Only Warranty

Milwaukee’s 5-Year Limited Warranty

Why Professionals Choose the Milwaukee M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw

Installers choose this M18 crimper for accurate, UL 486A-B classified results and straightforward inspection. The U-Style dies provide clear size and color codes, and they imprint the wire size onto the lug, which speeds QA and closeout. The inline design with a 340° rotating head reaches tight switchboards and gear where a C-head tool is awkward. PFM™ delivers the force needed for uniform connections on large aluminum feeders, and the green LED saves time by showing the cycle is complete. With ONE-KEY, supervisors can export crimp records for commissioning packets. Crews standardizing on the M18 battery platform get a compact, 8.2-lb bare tool that runs fast cycles and shares packs across other tools.

Milwaukee 2679-750AL M18 FORCE LOGIC 600 MCM Al Crimper w/ 750 MCM Expanded Jaw – Tool Only Notes for Buyers (quick tips)

Die/Connector Matching: Use the included U-Style 6T die chart; verify size and color against the connector manufacturer’s spec. For UL-classified results, match die, connector, and conductor exactly.
Connector Hold & Alignment: Let the proprietary jaw hold the lug while you seat the conductor fully; confirm flats are aligned before cycling.
Aluminum Conductor Prep: Brush oxide thoroughly and apply the specified inhibitor; keep strands straight to avoid fold-over.
Crimp Sequencing: On multi-crimp connectors, follow the maker’s sequence (often center-out). Mark each location with a paint pen.
Cycle Verification: Wait for the green LED. If not seen, use the release, inspect, and follow your rework procedure—don’t stack a second crimp over an uncertain first.
Battery Management: Keep packs warm in cold weather (near 0°F) and shaded in heat; run the tool’s pre-crimp check and swap packs if prompted.
Head Orientation: Rotate the head to keep force in line with the connector; avoid side-loading large Al lugs.
Inspection Cues: Confirm the die index imprint and expected flash; perform a tug test per spec before heat-shrink or tape.
Jaw Changes: Power down and keep the work area clean when swapping to 600 MCM or 750 MCM jaws; check die seats for debris before cycling.
Maintenance: Wipe the head/ram after dusty work; lightly oil corrosion-prone surfaces; replace worn dies to maintain uniform impressions.