Makita HP003GZ 40Vmax XGT Brushless 1/2″ Hammer Drill-Driver – Tool Only

The Makita HP003GZ 40Vmax XGT Brushless 1/2″ Hammer Drill-Driver is built for heavy-duty drilling and fastening applications where power, control, and durability are critical. Designed around Makita’s 40Vmax XGT platform, this cordless hammer drill delivers up to 1,590 in.lbs of torque, making it suitable for demanding work in concrete, steel, and large-diameter wood drilling. The brushless motor provides a strong power-to-size ratio while reducing heat buildup during prolonged use, supporting consistent performance on high-demand jobsites.

This hammer drill-driver features a three-speed transmission with a newly added medium-speed mode, giving operators a practical balance of torque and speed for driving long fasteners and performing heavy drilling tasks more efficiently. Active Feedback Sensing Technology (AFT) helps improve operator safety by automatically shutting down the motor if bit rotation suddenly stops, reducing the risk of kickback. eXtreme Protection Technology (XPT) adds protection against dust, debris, and moisture, making the tool suitable for harsh jobsite conditions. An electronic clutch with a digital torque display allows precise fastening control, while the all-metal 1/2″ self-ratcheting chuck improves bit retention and long-term durability.

Makita 40Vmax XGT Brushless 1/2″ Hammer Drill-Driver At a Glance

High Torque Output: Delivers up to 1,590 in.lbs (180 Nm) for heavy-duty drilling and fastening
Three-Speed Transmission: Low, Medium, and High modes for improved efficiency across applications
Active Feedback Sensing Technology (AFT): Shuts down the motor if rotation suddenly stops
eXtreme Protection Technology (XPT): Improves resistance to dust, debris, and moisture
Electronic Clutch with Digital Display: Allows precise torque selection and visual confirmation
All-Metal 1/2″ Chuck: Improves bit grip strength and durability
LED Job Light: Brighter output with wider illumination for dark work areas

Markets

Construction and Renovation Contractors: Used for drilling and fastening in wood, steel, and masonry
Electrical Contractors: Suitable for large hole drilling and fastener installation
Mechanical and HVAC Installers: Supports heavy fastening and structural mounting tasks
Industrial Maintenance Crews: Ideal for repair and installation work requiring high torque
Municipal and Facility Maintenance: Useful for infrastructure repairs and equipment installation
Trade Schools and Training Programs: Demonstrates advanced safety and torque control features

Contractors and professional trades rely on the Makita HP003GZ for its ability to handle demanding drilling and fastening tasks without sacrificing control. The added medium-speed mode improves productivity when driving long screws or performing heavy drilling, allowing work to be completed faster compared to tools limited to low-speed operation. High torque output and hammer drilling capability make it a versatile option for mixed-material jobsites.

Safety managers and experienced users value the inclusion of Active Feedback Sensing Technology, which helps reduce the risk of kickback during high-torque applications. The electronic clutch and digital torque display allow repeatable fastening results, reducing rework and damaged fasteners. For crews already invested in the Makita XGT battery system, this hammer drill-driver provides a reliable, high-output solution for daily professional use.

Makita HP003GZ 40Vmax XGT Cordless Brushless 1/2″ Hammer Drill-Driver – Tool Only Features

Active Feedback sensing Technology (AFT) automatically shuts down the tool if there is a sudden drop in rotation speed (e.g. kick-back)
eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
Heavy Duty Drilling Performance!
40Vmax XGT BL AFT Cordless 13 mm (1/2″) 180 N·m (1,590 in.lbs) Hammer Driver Drill
Feature a newly added medium-speed mode as one of its three-speed settings
The added medium-speed mode delivers combination of the torque and speed ideal for demanding tasks, such as driving long screws, which require both high torque and speed.
Added medium-speed mode improves work efficiency in heavy-duty applications, where our current and the competitors’ models can operate only in low-speed mode and with lower work efficiency.
In tightening long screws, operating speed in the medium-mode is approximately twice as high as that in low-speed mode.
Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
Electronic Clutch: Enhanced torque and clutch stages in clutch mode by high-torque in high-speed mode and new 3-speed settings (Low/Medium/High modes).
Dial for easy adjustment of fastening torque; with digital display for visual confirmation of selected torque
Electric brake for maximum productivity and increased operator safety
Soft start (in Low-speed mode) reduces kickback when starting with high-inertia bits such as larger diameter bits.
LED job light with higher brightness and wider illumination area: LED job light has been relocated from the switch portion to the bottom of the grip portion or improved illumination coverage.
In Light mode, the illumination time is extended, allowing for use as a jobsite light in dark environments.
All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability.
Keyless chuck for quick and easy bit installation and removal
eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
Reversing switch is conveniently located.
Durable, reversible belt clip convenient for temporary tool hanging.
41 Electronic clutch settings in low mode for precise fastening in a variety of applications.
LED job light with higher brightness and wide illumination area.

Makita HP003GZ 40Vmax XGT Cordless Brushless 1/2″ Hammer Drill-Driver – Tool Only Includes

(1) Keyless Drill Chuck
(1) Side Handle
(1) Double Ended Bit 2-45
(1) Bit Holder
(1) Stopper Pole
(1) Hook
Batteries and charger sold separately.

Makita HP003GZ 40Vmax XGT Cordless Brushless 1/2″ Hammer Drill-Driver – Tool Only Specifications

Model Number: HP003GZ
UPC: 0197050014801
Battery Voltage: 40V Max
Battery Platform: XGT™
Maximum Torque: 1,590 in.lbs (180 Nm)
No Load Speed: Low: 0–650 RPM; Medium: 0–1,800 RPM; High: 0–2,400 RPM
Blows Per Minute: Low: 0–9,750 BPM; Medium: 0–27,000 BPM; High: 0–36,000 BPM
Chuck Size: 1/2 in. (13 mm)
Drilling Capacity – Masonry: 13/16 in. (20 mm)
Drilling Capacity – Steel: 13/16 in. (20 mm)
Drilling Capacity – Wood (Auger): 2 in. (50 mm)
Drilling Capacity – Self-Feed Bit: 3-5/8 in. (92 mm)
Drilling Capacity – Hole Saw: 6 in. (152 mm)
Overall Length: 7-3/4 in. (197 mm)
Net Weight (Tool Only): 6.2 – 8.8 lbs
Vibration Level: 6.8 m/s²
Noise Level: 88 dB(A)
Power Source: Cordless
Motor Type: Brushless
Includes Battery: No
Includes Charger: No

Makita HP003GZ 40Vmax XGT Cordless Brushless 1/2″ Hammer Drill-Driver – Tool Only Warranty

Makita’s 3 Year Limited Warranty

Why Professionals Choose the Makita 40Vmax XGT Brushless 1/2″ Hammer Drill-Driver

Professionals choose the Makita HP003GZ because it delivers the torque and control required for heavy-duty drilling and fastening across multiple materials. The combination of high torque output, hammer drilling capability, and three-speed transmission allows crews to move efficiently from concrete drilling to large fastener installation without switching tools. The added medium-speed mode helps reduce cycle times when driving long screws or performing demanding tasks.

Active Feedback Sensing Technology and the electronic clutch system give operators greater confidence when working with high-torque applications, reducing kickback and improving consistency. Paired with the Makita 40Vmax XGT battery platform, this cordless hammer drill-driver supports high-output work while maintaining portability and durability for everyday professional use.