J-B Weld 50132 25mL PlasticWeld Quick Setting Epoxy Syringe

J-B Weld 50132 25mL PlasticWeld Quick Setting Epoxy Syringe – World’s Strongest Bond

The J-B Weld PlasticWeld (50132) is a two-part, quick-setting epoxy syringe engineered for plastic repair and mixed-material bonding. Metered at a 1:1 ratio, it dispenses evenly for accurate small batches, then cures to a tough bond without slumping. PlasticWeld is designed for hard plastics such as ABS, PVC, vinyl, and most composites, and it also adheres to fiberglass, glass, and select metals used in automotive trim and interior parts. From broken tabs and cracked housings to light fabrication on plastic panels, the adhesive reaches handling strength in 5 minutes and cures in 1 hour, allowing same-day reassembly. Rated to 3,900 PSI, this quick setting epoxy provides stronger, gap-filling bonds than typical super glues and resists common shop exposures. The cured adhesive dries a translucent yellow, making it easy to see during assembly while blending under many finishes. A re-sealable, no-waste cap helps keep the 25 mL syringe ready for the next repair.

J-B Weld 25mL PlasticWeld Quick Setting Epoxy Syringe At a Glance

• 5-Minute Set: Fast fixture for plastic repair and small assemblies.
• 1-Hour Cure: Return parts to service the same day.
• 3,900 PSI Strength: Durable, gap-filling bond on rigid plastics and composites.
• 1:1 Syringe Dispense: Consistent mixes with minimal mess.
• Translucent Yellow Cure: Easy visual confirmation during install.
• Water & Oil Resistant: Stands up to typical shop and automotive environments.
• Multi-Material Compatibility: Bonds most plastics (ABS, PVC, vinyl), fiberglass, glass, and more.
• Re-Sealable Cap with Mixing Kit: Cap, tray, and stir stick for controlled application.

Markets

• Automotive Repair & Upfitters: Tabs, clips, bezels, and interior plastics on cars, trucks, and powersports.
• Industrial Maintenance (MRO): Quick fixes on guards, housings, and equipment panels made from ABS/PVC.
• Construction & Renovation: Repairs to fixtures, housings, and fiberglass or plastic parts on site.
• Sign, Display & Fabrication: Clean bonds on acrylics, composites, and glass.
• Marine & RV Service: Interior plastic and fiberglass repairs with fast turnaround.
• Municipal & Facility Maintenance: Day-to-day fixes on plastic enclosures and lenses.
• Trade Schools & Training Shops: Demonstrates best practices for two-part epoxy plastic repair.

Professionals choose a quick-setting plastic repair epoxy to keep tickets moving while achieving a dependable bond. PlasticWeld’s 5-minute set lets techs position parts and hold alignment without long clamp times, and the 1-hour cure supports same-day reassembly of panels, housings, and lenses. The epoxy syringe meters equal parts for repeatable mixes, while 3,900 PSI strength and resistance to water and oil make it suitable for automotive and facility environments. For mixed materials—plastic to fiberglass or glass—the adhesive fills small gaps that thin super glues can’t bridge, delivering neat, durable repairs across service trucks and shop benches.

J-B Weld 50132 25mL PlasticWeld Quick Setting Epoxy Syringe Features

• Two-Part Epoxy System: 1:1 resin and hardener for reliable performance.
• Quick-Setting Formula: Sets in 5 minutes; cures in 1 hour for fast turnaround.
• High Bond Strength: Tensile strength up to 3,900 PSI.
• Designed for Plastics: Works on ABS, PVC, vinyl, most composites; also bonds fiberglass and glass.
• Resistant to Water & Oil: Suitable for shop, marine, and automotive interiors.
• User-Friendly Packaging: Dual-plunger syringe with re-sealable no-waste cap, mixing tray, and stir stick.

J-B Weld 50132 25mL PlasticWeld Quick Setting Epoxy Syringe Includes

• (1) 25 mL dual-plunger PlasticWeld epoxy syringe
• (1) Mixing tray
• (1) Stir stick
• (1) Re-sealable no-waste cap

J-B Weld 50132 25mL PlasticWeld Quick Setting Epoxy Syringe Specifications

• Type: Two-part quick-setting epoxy adhesive
• Mix Ratio: 1:1 (resin:hardener)
• Volume: 25 mL (0.85 fl oz)
• Set Time: 5 minutes
• Cure Time: 1 hour
• Tensile Strength: 3,900 PSI
• Dry Color: Translucent yellow
• Resistance: Water and oil
• Recommended Materials: (5) Plastic/Composite/PVC, Fiberglass, Glass, Vinyl, Select Metals
• Typical Uses: (5+) Automotive plastic tabs and housings, appliance/fixture repairs, fiberglass panels, lenses, mixed-material assemblies
• UPC: 043425501325
• Country of Origin: USA

Why Customers Select the J-B Weld 25mL PlasticWeld Quick Setting Epoxy Syringe

Installers pick PlasticWeld when they need a quick setting epoxy that grabs plastics with confidence. On ABS panels, PVC fittings, or fiberglass parts, the two-part epoxy fills small gaps and sets in about 5 minutes, so pieces stay aligned without long clamp times. The epoxy syringe makes mixing simple on the truck or at the bench, and the 1-hour cure means jobs can be completed in one visit. With 3,900 PSI strength and resistance to water and oil, it’s a dependable option for automotive plastic repair, facility maintenance, and light fabrication on glass and composites. The translucent yellow cure is easy to see during assembly and finishes cleanly for professional results.