BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump

Designed for daily commercial cleaning, the BE Power Equipment HW2765HG is a hot water pressure washer that pairs a Honda GX200 commercial engine with a General triplex pump to deliver 2,700 PSI at 2.8 GPM. The direct-drive layout keeps the footprint compact while transferring power efficiently from the engine to the pump. An external unloader and thermal protection support pump life during long duty cycles. For grease, oil, and heavy grime, the diesel-fired 12V Wayne burner heats water through a 1/2″ cold-rolled steel heating coil with an adjustable thermostat up to 89°C / 193°F. Crews can switch the burner off and run cold water when needed.

This unit is built for tough jobs in maintenance shops, equipment yards, and construction sites where hot water cuts through deposits that cold water and chemicals struggle with. The powder‑coated steel frame rides on four 12″ flat‑free tires for stability over rough surfaces, with a roll‑cage design that protects components yet allows easy service access. A built‑in lift point and removable wheels with integrated mounting brackets make truck or trailer installations straightforward. Included commercial accessories—50 ft high‑pressure hose, 36″ insulated gun/wand, and five quick‑connect nozzles—bring the machine to the job ready to work.

BE 2,700 PSI Hot Water Pressure Washer, 2.8 GPM with Honda GX200 Engine At a Glance

• 2,700 PSI / 2.8 GPM: Productive cleaning performance for grease, oil, and heavy soil.
• Honda GX200 Commercial Engine: Proven reliability for all‑day operation with easy starts.
• General Triplex Pump: Durable die‑cast body and forged brass manifold for long service life.
• Diesel‑Fired 12V Burner: Heats water up to 89°C / 193°F for faster degreasing.
• External Unloader: Improved cooling and versatility to help protect the pump.
• Direct‑Drive System: Compact package with efficient power transfer.
• Jobsite‑Ready Frame: Powder‑coated steel roll cage with (4) 12″ flat‑free tires and lift point.
• Complete Accessories: 50 ft hose, insulated gun/wand, and (5) quick‑connect spray nozzles.

Markets

• Construction and Renovation: Wash tools, forms, mixers, and site equipment; remove concrete splatter and grime.
• Automotive and Fleet Service: Degrease engines, transmissions, and undercarriages; clean service bays and equipment.
• Agriculture and Landscaping: Remove oil, hydraulic fluid, and residue from tractors, attachments, and mowers.
• Municipal Works and Facilities: Maintain trucks, lift stations, parks equipment, and shop floors.
• Property Management and Contract Cleaning: Clean parking areas, dumpsters, loading docks, and building exteriors.
• Oil & Gas / Industrial Maintenance: Tackle oily residues on machinery, piping, and containment areas.
• Trade Schools and Training Centers: Demonstrate hot‑water cleaning principles and safe pressure‑washing practice.

Shops and service crews benefit from hot water because it reduces surface tension and activates detergents, breaking the bond between oil, grease, and dirt. At 2,700 PSI and 2.8 GPM, the HW2765HG delivers enough impact to lift contaminants while heat and surfactants emulsify them for fast rinse‑off. The result is less scrubbing, shorter dwell times, and cleaner parts and surfaces. On equipment yards and construction sites, the diesel burner provides on‑demand heat for stubborn deposits, while the adjustable thermostat lets operators dial in temperature for delicate finishes or heavy steel.

Contractors will appreciate the straightforward layout: a Honda GX200 for dependable power, a General triplex pump for durability, and an external unloader for cooler running and easy service. With a roll‑cage frame, flat‑free tires, and integrated lift/mount points, this washer moves easily around the jobsite or mounts securely on a truck or trailer. The included hose, wand, and nozzle set means technicians can set up quickly and meet tight schedules.

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Features

• Commercial Honda engine with excellent weight to power ratio. Designed to be used all day, everyday.
• Direct drive system connects the engine to the pump for a compact and efficient power transfer.
• Commercial grade General triplex pump featuring die-cast body, forged brass manifold, one-piece plungers, thermal release valve and improved heat dissipation.
• External unloader provides superior cooling and versatility to further enhance pump life.
• Heating coil is ignited by a 12v Wayne burner that is fueled with diesel. Includes AGM deep cycle battery.
• The burner can be turned off and controlled with the adjustable thermostat that can be set up to 89°/193°F.
• Commercial grade accessories included are a 50 foot high-pressure hose, spray gun wand assembly, and five spray nozzles.
• Powder coated steel frame with four 12” flat free tires for stability and to handle rough terrain. Roll cage design protects the components while allowing easy access to use or maintain.
• A lift point is built into the frame to allow the use of a crane to lift it onto a truck or trailer.
• Frame includes mounting brackets for quick installation onto trucks or trailers by removing the wheels.
• The actual product may vary from the images shown on the website.

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Includes

• (1) 50′ x 3/8″ twin‑wire braided high‑pressure hose — Part No. 85.238.251
• (1) 36″ insulated spray gun/wand assembly — Part No. 85.205.026
• (5) Quick‑connect nozzles: 0°, 15°, 25°, 40°, Soaper — Part No. 85.210.040H
• (1) External unloader with 36″ hose — Part No. 85.300.003

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Specifications

• Pump Style: Triplex
• Unloader: External
• Series: Commercial
• Engine: Honda GX200
• Pump: General
• CC: 200
• PSI: 2,700
• GPM: 2.8

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Specs

• Engine: Honda GX200
• Type: Air Cooled, 4-Stroke OHV
• Displacement: 196CC
• Fuel Type: 86 Octane, Up to 10% Ethanol
• Oil Type: SAE 10W30

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Specs

• Model: GENERAL TP2530J34
• Type: Triplex
• Part Number: 85.139.020SPH
• Oil Type: 30W NON-DETERGENT
• Soap System: ADJUSTABLE Injector

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Unloader Specs

• Type: EXTERNAL W/36” HOSE
• Part Number: 85.300.003

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Unloader Burner

• THERMOSTAT: ON/OFF AND ADJUSTABLE
• MAX HEAT: 89°C / 193°F
• IGNITER: 12V WAYNE BURNER
• HEATING COIL: 1/2” COLD ROLLED STEEL
• COIL TUBE LENGTH: 80’ LENGTH OF TUBING
• FUEL CAPACITY: 6 GALLON
• FUEL TYPE: DIESEL

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Frame

• Material: Powder Coated Steel
• Wheels: 12″ Flat Free

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Accessories

• Hose Type: 50′ X 3/8″ TWIN WIRE BRAIDED
• Part Number: 85.238.251
• Nozzles:  0°, 15°, 25°, 40°, & Soaper
• Part Number: 85.210.040H
• Gun Wand: 36″ Insulated
• Part Number: 85.205.026
• Fittings: Quick Connect

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Boxed Size

• LxWxH: 45″ x 33″ x 52″
• Weight: 480 LBS

BE Power HW2765HG 2,700 PSI Hot Water Pressure Washer, 2.8 GPM, Honda GX200, Triplex Pump Warranty

• Engine: 3 Year Limited Warranty
• Pump: 5 Year Limited Warranty
• Burner: 3 Year Limited Warranty
• UPC : 777897342859

Why Customers Choose the BE Power Equipment 2,700PSI  Hot Water Pressure Washer

Crews pick the HW2765HG when a hot water pressure washer is the fastest way to remove oil and grease. The Honda GX200 provides dependable power, while a General triplex pump holds pressure steadily at 2,700 PSI and 2.8 GPM for consistent results. With a diesel burner and adjustable thermostat, technicians match temperature to the job—lower heat for painted panels, higher heat for steel and engine parts. The external unloader simplifies service and helps the pump run cooler on long shifts.

For mobile cleaning on trucks or trailers, the roll‑cage frame, flat‑free tires, and lift point make transport and mounting straightforward. Quick‑connect spray nozzles and a 36″ insulated wand let operators change patterns fast for pre‑soak, rinse, and final detail. From fleet maintenance to construction equipment wash‑down, the HW2765HG helps teams work faster with less scrubbing and reduced detergent use.