WASIP RJ95Y-S Ground Force Safety Size Small Hi-Vis Yellow Ripstop Rain Jacket

WASIP RJ95Y-S Ground Force Small (S, SM) Hi-Vis Ripstop Rain Jacket – Hi-Vis Safety Yellow

Built for jobsite safety and all-weather visibility, the WASIP Ground Force RJ95Y-S is a Small (S, SM) hi-vis rain jacket in Hi-Vis Safety Yellow. The 450 denier ripstop polyester shell is PU coated and rated 100% waterproof up to 8000 mm and windproof up to 8000 mm, keeping traffic crews and installers dry through sustained rain and gusts. Double-stitched, fully sealed seams lock out water at stress points, while the full mesh lining helps manage heat and humidity during active work. CSA-approved reflective tape provides dependable recognition in low light, and the removable hood, dual radio straps, and heavy-duty 2-way zipper with storm flap support daily field use. Sized for Small / S / SM frames, rib-knit storm cuffs seal the sleeves without adding bulk. The jacket is CSA Z96-22 Class 2 Level 2 on its own and becomes Class 3 when worn with hi-viz pants featuring reflective leg bands; it also carries ANSI/ISEA 107-20 Class 3 Type P & R for roadway and general industry use.

WASIP Ground Force Safety Size Small Hi-Vis Yellow Ripstop Rain Jacket At a Glance

• Small Size (S, SM): Proportioned for smaller builds; secure PPE fit without excess fabric.
• Hi-Vis Safety Yellow: High-visibility yellow stands out in rain, fog, and dusk.
• 450D Ripstop Polyester, PU Coated: Resists abrasion, punctures, and tears on active sites.
• 100% Waterproof/Windproof (8000 mm): Weather barrier for continuous rain and wind.
• Fully Mesh Lined: Improves airflow and comfort during high-output tasks.
• Heavy-Duty 2-Way Zipper + Storm Flap: Easy venting and reliable closure with snap backups.
• Rib-Knit Storm Cuffs: Seal at the wrists to keep water out.
• Compliance Ready: CSA Z96-22 Class 2 Level 2 (upgrades to Class 3 with reflective-band pants); ANSI/ISEA 107-20 Class 3 Type P & R.

Markets

• Road and Traffic Control: Hi-Vis Safety Yellow jacket improves recognition near moving vehicles.
• Construction and Renovation: S/SM safety rain jacket layers over hoodies for exterior work.
• Municipal and Utilities: Meets visibility needs for water, waste, and public works crews.
• Warehousing and Logistics: Weather protection for dock and yard operations in low-light conditions.
• Transit and Airport Operations: High-visibility yellow aids ground support and signaling tasks.
• Trade Schools and Training: Demonstrates proper CSA/ANSI pairing and size selection (Small/S/SM).

Mechanics, flaggers, and installers choose the RJ95Y-S Small (S, SM) because it delivers reliable safety performance in a hi-vis yellow rain jacket that actually fits smaller workers. The 450D ripstop shell and fully sealed seams stand up to pallets, ladders, and brush, while the 8000 mm waterproof rating keeps focus on the job instead of the weather. Supervisors appreciate how simple compliance is: wear the jacket as CSA Class 2 Level 2, or pair it with reflective-band hi-viz pants to achieve Class 3 in minutes. Mesh lining manages heat during active shifts, rib-knit storm cuffs guard the sleeves, and the removable hood adapts to helmets and changing conditions. For road work, municipal maintenance, and logistics, this Small safety rain jacket combines visibility, protection, and everyday usability.

WASIP RJ95Y-S Ground Force Safety Size Small Hi-Vis Yellow Ripstop Rain Jacket Features

• 450D Ripstop Polyester, PU Coated: Durable outer shell for daily field use.
• 100% Waterproof/Windproof (up to 8000 mm): Keeps water and wind out during extended exposure.
• Double-Stitched, Fully Sealed Seams: Reduces leak points at high-stress areas.
• CSA Hi-Vis Reflective Tape: Consistent visibility in low-light and traffic zones.
• Fully Mesh Lined: Breathable interior for comfort over layers.
• Removable Hood: Quick on/off for helmet or cap use.
• Heavy-Duty 2-Way Zippers with Storm Flap & Snaps: Secure closure and easy venting.
• Rib-Knit Storm Cuffs: Seals wrists against rain and wind.
• Dual Radio Straps: Convenient mounting and cable management.
• Two Exterior Front Pockets: Keep essentials close and dry.

WASIP RJ95Y-S Ground Force Safety Size Small Hi-Vis Yellow Ripstop Rain Jacket Includes

• (1) Small (S, SM) Hi-Vis Safety Yellow ripstop safety rain jacket
• (1) Removable hood
• (2) Exterior front pockets
• (2) Radio straps

WASIP RJ95Y-S Ground Force Safety Size Small Hi-Vis Yellow Ripstop Rain Jacket Specifications

• Size: Small (S, SM)
• Color: Hi-Vis Safety Yellow (high-visibility yellow)
• Product Type: Safety/PPE
• Material: 450 denier ripstop polyester, PU coated
• Waterproof/Windproof Rating: Up to 8000 mm (water) / up to 8000 mm (wind)
• Seams: Double-stitched and fully sealed
• Lining: Fully mesh lined
• Closure: Heavy-duty 2-way zipper with storm flap and snap closures
• Cuffs: Rib-knit storm cuffs
• Pockets: (2) Exterior front
• Straps: (2) Dual radio straps
• Compliance: CSA Z96-22 Class 2 Level 2 (becomes Class 3 with hi-viz pants featuring reflective leg bands); ANSI/ISEA 107-20 Class 3 Type P & R
• Style: RJ95
• Product Code: RJ95Y
• SKU: RJ95Y-S
• Quantity: (1) Jacket
• Fit Note: If measurement falls between sizes, select the larger size.

Why Customers Choose the WASIP Ground Force Safety Size Small Hi-Vis Yellow Ripstop Rain Jacket

Crews pick the Small (S, SM) RJ95Y-S because this hi-vis rain jacket blends CSA Z96-22 compliance and ANSI/ISEA 107-20 Class 3 Type P & R with real-world weather protection. The high-visibility yellow shell, reflective tape, and rib-knit cuffs keep the wearer visible and dry, while the mesh lining and 2-way zipper make it easy to manage heat on the move. The removable hood and dual radio straps support helmets and comms without fuss. Pairing the jacket with reflective-band hi-viz pants upgrades to CSA Class 3, helping supervisors hit visibility targets without buying a separate coat. For smaller builds, the S/SM sizing offers a comfortable, secure fit that stays put during signaling, loading, and equipment checks.