Makita DLX2141SY 18V LXT 2pc 1/2″ Drill / Driver + 1/4″ Impact Driver Combo Kit (2) 1.5AH

The Makita DLX2141SY combo kit pairs two proven 18V LXT tools for everyday drilling and fastening. The DDF453Z 1/2″ drill/driver delivers two mechanical speed ranges (0–400 / 0–1,300 RPM) and 16 clutch settings with up to 340 in-lb of torque for wood, metal, and plastic. The DTD152Z 1/4″ hex impact driver adds up to 1,460 in-lb of torque with 0–2,900 RPM and 0–3,500 IPM for fast seating of screws, lag bolts, and structural fasteners. Both tools are compact with ergonomic soft grips for control during extended use. The kit is ready to work with (2) 1.5Ah lithium-ion batteries, the DC18SD charger, and a durable plastic carrying case.

Designed for crews who need reliable performance without cords or hoses, this set covers pilot holes, large spade bits, and repetitive screw driving on framing, cabinets, fixtures, and hardware. Makita’s Battery Protection System monitors temperature, current, and discharge to help protect cells, while the charger’s active controls manage voltage and heat for dependable charge cycles. With all-metal gears in the drill, XPT™ protection in the impact driver, and bright twin LEDs on the driver, the DLX2141SY provides a practical, portable solution for jobsite and shop tasks.

Makita 18V LXT 2pc 1/2″ Drill / Driver + 1/4″ Impact Driver Combo Kit At a Glance

• Two Essential 18V Tools: 1/2″ drill/driver + 1/4″ hex impact driver cover drilling and fastening.
• Compact, Lightweight Design: Short overall lengths improve access in tight spaces.
• Usable Power: Up to 340 in-lb (drill) and 1,460 in-lb (impact) handle common construction fasteners.
• Dual Speed Drill: 0–400 / 0–1,300 RPM with 16 clutch settings for controlled driving.
• High-Impact Performance: 0–2,900 RPM and 0–3,500 IPM for quick screw seating.
• Battery Protection System: Monitors conditions to help extend battery and tool life.
• Smart Charging: DC18SD charger manages current, voltage, and temperature for consistent charging.
• Ready to Go: Includes (2) 1.5Ah batteries and a plastic carrying case for transport and storage.

Markets

• Construction & Renovation: Daily drilling and fastening for framing, trim, and hardware installs.
• Electrical & HVAC Trades: Brackets, anchors, sheet metal screws, and panel work in tight spaces.
• Cabinetry & Millwork: Precision pilot holes and consistent fastener seating in hardwoods and MDF.
• Facility & Property Maintenance: Portable kit for on-the-spot repairs without extension cords.
• Automotive & Equipment Service: Light drilling and fast removal/installation of panels and brackets.
• Municipal & Institutional Work: Cordless operation for occupied spaces and quick task turnover.
• Trade Schools & Training Programs: Introduces students to safe, reliable cordless drilling and driving.

Professionals will find the drill/driver’s two-speed gearbox and clutch useful for switching between pilot holes and finish hardware without stripping heads or over-driving. The impact driver speeds through decking screws, tapcons, and lag screws with consistent torque, while XPT™ protection helps in dusty or damp areas. Maintenance teams benefit from the compact size and the included carrying case for quick moves between buildings. With two 1.5Ah batteries, the kit supports continuous work—one battery in use, one on charge—while the DC18SD keeps charging predictable. For apprentices and students, the familiar 18V LXT platform offers an easy entry point with broad cross-compatibility.

Makita DDF453Z 18V Drill Features

• Features a single sleeve keyless drill chuck for easy bit installation / removal
• Ddf453Z 1/2-inch drill/driver has 16 clutch settings deliver up to 340 in. Lbs. Of Torque
• Single sleeve keyless chuck enables easy bit installation/removal with one hand
• Ergonomically designed rubberized soft grip provides more control and comfort
• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time
• Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery
• Compact and lightweight design (only 9 – 7/16″ length)
• Ergonomic soft grip design for vibration absorption and comfortable operation
• All metal gears for more efficient power transmission and excellent durability

Makita DTD152Z 1/4″ Hex Impact Driver Features

• Trigger controlled Variable Speed and Reversible
• Ultra-Compact and Lightweight Design with Overall Length of Just 5-3/8″
• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris, and liquids for optimal performance in extreme conditions
• Increased max. torque of 1,460 in. lbs.
• One-touch bit holder enables quick and easy bit installation
• Twin LED lights with pre-glow and after-glow functions
• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation
• Features re-contoured rear grip portion and ribbed grip for improved hold
• NEW Battery Protection System provides Over-Discharge, Temperature and Circuit Protection for enhanced performance, battery cycle life and overall battery life

Makita DLX2141SY 18V LXT 2pc 1/2″ Drill / Driver + 1/4″ Impact Driver Combo Kit (2) 1.5AH Includes

• 1/2″ Cordless Drill / Driver (DDF453Z)
• 1/4″ Cordless Impact Driver (DTD152Z)
• 2ea 1.5 AH 18V (Compact) Li-Ion Batteries BL1815N (196235-0)
• Standard Charger (DC18SD)
• Plastic Carrying Case (824812-5)

Makita DTD152Z 1/4″ Hex Impact Driver Specifications

• Platform: 18V LXT Li-ion
• Batteries Included: (2) 1.5Ah
• Charger: DC18SD (smart charging with current/voltage/temperature control)

DDF453Z 1/2″ Drill/Driver

• Chuck Size: 1/2″ single-sleeve keyless
• No-Load Speed: 0–400 RPM / 0–1,300 RPM
• Max Torque: 340 in-lb
• Clutch Settings: (16) + drill mode
• Motor: Brushed
• Length: 9-7/16″
• Grip: Rubberized soft grip

DTD152Z 1/4″ Hex Impact Driver

• Hex Shank: 1/4″
• No-Load Speed: 0–2,900 RPM
• Impacts Per Minute: 0–3,500 IPM
• Max Torque: 1,460 in-lb (165 Nm)
• Vibration Level: 10.5 m/s²
• Noise Level: 93 dB(A)
• Overall Length: 5-3/8″ (137 mm)
• Net Weight: 2.0 lb (0.9 kg)

Warranty

• Makita’s 3 Year Limited Warranty

Why Customer Choose the Makita 18V LXT 2pc 1/2″ Drill / Driver + 1/4″ Impact Driver Combo Kit

Crews select this 18V LXT combo kit because it covers most daily tasks with a compact cordless drill and a high-torque impact driver in one case. The 1/2″ drill handles clean holes and controlled fastener driving with a useful clutch, while the 1/4″ hex impact takes over for long screws and lag bolts where extra torque is needed. Two 1.5Ah lithium-ion batteries, a reliable charger, and a carrying case make it easy to rotate packs and move between rooms or floors. For installers and maintenance teams, variable speed triggers, bright LEDs, and simple bit changes keep work steady and predictable. On the same battery platform as other Makita tools, the kit fits into existing fleets and helps teams finish drilling and fastening tasks efficiently.